T/Mon LNX Remote Alarm Monitoring System: Complete Visibility of All Your Remote Sites

stars Average user rating: 4.4 out of 5 stars based on 50 reviews from the install base.
T/Mon LNX Remote Alarm Monitoring System
T/Mon LNX: This hardware platform monitors, mediates, and forwards alarm data in over 25 standard and proprietary protocols, including legacy equipment no one else can support when running T/MonXM software.

"If you do nothing else, you have to monitor temp & power with T/Mon."

T/Mon LNX can help you reduce costs and monitor a variety of equipment at multiple remote sites.

  • Multiprotocol, multifunction single-platform solution for all remote alarm monitoring uses.
  • Collects alarm monitoring data from lots of different equipment throughout many manufacturers and protocols.
  • Supports over 25 protocols: ASCII, DCP, DCPF, DCPX, DNP3, E2A, SNMP, TABS, TBOS, TL1, and more.
  • Supports legacy devices and protocols from Badger, Cordell, Granger, Larse, NEC, Pulsecom, and Teltrac.
  • T/Mon GFX graphical user interface to view alarms visually on layered geographic maps.
  • New Mobile Web Interface allows you to view and acknowledge alarms right from your smartphone.
  • Mediate and forward remote alarm monitoring data to different protocols and master of masters.
  • Maps remote alarm monitoring data from all your equipment to one consistent interface.
  • Plain English alarm descriptions and specific instructions for correcting alarm conditions ensure prompt, effective response to alarms.
  • Displays network status and alarm information to multiple users connected via LAN, dial-up, or serial connection.
  • Automatically sends detailed notifications and instructions to repair technicians by alphanumeric pager, cell phone, and e-mail.
  • Control remote site equipment automatically in response to multiple alarm inputs.
  • History, trending, and root cause analysis.
  • Central database admin for all your remote sites.
  • Detailed Control Panel Provides the Visibility You Need

See Real-World T/Mon LNX Applications

Remote monitoring with a master like T/Mon

Site Dialer
Get voice alerts with
the new T/Mon LNX accessory -
the T/Mon Site Dialer

T/Mon is a central alarm master station that collects alarms from your remote equipment. It's a necessary tool if you have more than 10 sites. At that point, monitoring your sites individual via RTU notifications gets out of hand. While there are other master stations available, T/Mon has several key advantages: very high uptime, multi-protocol compatibility, and intelligent alarm processing.

T/Mon uptime is protected via security and redundancy

The most basic responsibility of an alarm master is to continue operating no matter what. If it fails, you're blind to network threats. T/Mon enhances uptime in a few ways.

The first is internal hardware redundancy. Hard disks are the least reliable element in most computer systems, so T/Mon maintains a mirrored set of drives. Power supplies and electrical feeds can go down, so T/Mon has two redundant power inputs.

View Interface Screen shots
The T/MonXM interface makes alarm information easy to find and understand. View interface screen shots.

View Online Interface Demo

Design elements like these give you a huge boost to your remote alarm monitoring reliability. Consider, purely as an example, a hypothetical piece of equipment with one component that has 99% uptime. That means it's offline 1% of a time. That's terrible performance, but this is just a simple example and it will keep the math simple.

Now, what if we add a second redundant component, also with 99% uptime? It will also be offline 1% of the time. Assuming random distribution, however, BOTH components will only BOTH be offline 0.01% of the time. That's a 100x improvement in reliability without any improvement of individual components. Redundancy is a powerful thing.

The next step is complete server redundancy. No amount of redundant components can help you if your central office loses power, gets flooded by a hurricane, or otherwise fails. With T/Mon you can deploy two complete master stations at two different locations (even on opposite sides of the world). When the primary goes offline for any reason, the secondary will take over the remote alarm monitoring duties within seconds.

Server redundancy can also be implemented in a hierarchy. I you have 3 regions in your network, you can deploy a T/Mon (or a pair) in each region, plus one more at the top of the network. On a day-to-day basis, this gives each region its own view of the network. During a crisis, each region is independent of the other, so no failure of one region will take down another. Even if the top-level T/Mon goes down, each of the regions can still monitor itself locally.

Finally, T/Mon has strong security protections. You can enforce password rules (or use a RADIUS server) and set individual access rights for each user. Protecting against the harmful actions of your own employees, whether accidental or malicious, is a big part of T/Mon's reliability.

T/Mon supports multiple protocols

Most modern masters support a small number of standard protocols. This is a lot better than the old days of individual closed protocols for each manufacturer. Still, much of that old remote alarm monitoring equipment is still in service. T/Mon supports over 30 protocols for exactly that reason. You might have hundreds of legacy remotes in the field that still work. T/Mon lets you keep using them, while also maintaining compatibility with modern protocols like SNMP and DNP. If you want to forward alarms to an enterprise-grade SNMP manager (ex. HPOV), T/Mon makes an excellent protocol mediator for legacy monitoring gear.

T/Mon intelligently filters alarms and alerts you of impending trouble

Any master can send you an email/SMS for every alarm. Good ones like T/Mon are smart about it. You only have so much time and attention. You don't need (or want!) to be woken up at 3am for a minor alarm condition. With T/Mon, you can filter nuisance alarms (temporarily or permanently) to maintain your focus on the real threats. You can also use alarm severity to dictate automatic alerts at different times of the day. You can even set up technician schedules, so T/Mon will automatically follow your weekly/monthly "on call" technician schedule.

Client Reviews. (show all)

Read about SSL Security

Click here to see the T/Mon NOC Release Announcement

Get a Custom Application Diagram of Your Perfect-Fit Monitoring System

There is no other network on the planet that is exactly like yours. For that reason, you need to build a monitoring system that's the right fit for you.

"Buying more than you need" and "buying less than you need" are real risks. You also have to think about training, tech support, and upgrade availability.

Send me a quick online message about what you're trying to accomplish. I'll work with you to build a custom PDF application diagram that's a perfect fit for your network.

Make an Informed Decision

Your network isn't off-the-shelf.

Your monitoring system shouldn't be, either.

Customized monitoring application drawing

We'll walk you through this with a customized monitoring diagram.

Just tell us what you're trying to accomplish with remote monitoring.

Get a Custom Diagram