Each item here is a "building block" that can be (or already has been) incorporated into a larger product. When you for building blocks that interest you, you'll see finer subsets of that building block and any products that currently include it.
You'll have the chance to send an online message to Engineering. You can also to speak with an engineer immediately.
Sometimes, you just need to see and record what's happening. An IP camera delivers still images, streaming video, and/or audio back to your central office. The recorded files may be stored on a central server for later review. Some IP cameras may also monitor contact closures, temperature, and perform other RTU functions.
|Solid-State Hard Drive|
In most devices that have them, traditional hard disks are the most likely component to fail. Solid-state flash drives have no moving parts, making them much more reliable for high-uptime applications.
|Serial Terminal Server|
Remotely connect to serial equipment by reaching through a device with a long-distance LAN or similar connection. Buffer PBX data to prevent loss, dynamically switch ports from RS232 & RS485, connect securely with SSH, and protect yourself with isolated serial ports.
|Analog Gauges and Datalogger|
These provide intuitive visual display of analog sensor data. Moving needles show current values, and historical data may be logged, charted, and trended for identification of long-term threats.
|UPS (Uninterruptible Power Supply)|
Devices equipped with a UPS will continue to function on battery power until electricity is restored.
Private VOIP communications offer an economical way to establish voice communication across your network of remote sites. In areas without mobile phone coverage, VOIP can be a vital asset.
|Data Closet Monitoring|
Monitor your data closet with these technologies focused on protecting IT equipment. Daisy-chain sensors from an alarm remote across one wire, control fans remotely, and buffer PBX data in local RAM during communication failures.
|10/100/1000 (Gigabit) Ethernet Switch|
For delivering LAN to your equipment, Ethernet switches are critical. Additional value may be gained from Gigabit (10/100/1000BaseT) capability and physical integration within an RTU or other device.
Equipping products with a T1 interface allows alarm data and LAN traffic from other devices to be transported over T1 instead of traditional Ethernet.
Propane generators are a common backup power source at a variety of sites. These technologies support monitoring of tank levels, flow rates, run times, and intelligent estimation of remaining run-time.
|Voice Alarm Dialer|
When you need to hear alarms via automated phone calls, this technology allows your alarm remotes and master stations to do so. Advanced functions include extended call lists, alarm categorization for intelligent dispatch, and multiple voice options.
|AC Switching & Current Monitoring|
Give yourself the ability to remote monitor and control AC power. Know when AC current runs outside of acceptable ranges, and remotely reboot equipment with AC power relays.
|Optical Fiber Interface|
An optical fiber interface provides an alternative to LAN transport. Alarms can be reported from environments without Ethernet, and LAN access may be dropped off for site devices.
This capability allows RTUs, master stations, and other equipment to pass authentication attempts to a central RADIUS server for adjudication. Access rights are granted or denied based on the centralized RADIUS user database.
Power your monitoring device or other gear from a solar panel. This provides a backup power source when power failures, or may act as the only power source with the help of a battery.
A more secure version of the popular monitoring protocol. SNMPv3 provides important encryption capabilities that were lacking in previous versions.
A variety of short- and long-range technologies for transmitting data without wireless. Useful as either a primary or backup communications channel.
|Automated "SNMP Pinging" (GET Requests)|
This is a method of achieving "heartbeat" or "keep-alive" functionality with SNMP communications. GET requests at regular intervals are used in the same manner as an ICMP ping to automatically detect if a device is online.
Do you need a building block that isn't currently listed? No problem. Send us an online message or call 1-800-693-0351.
Call 1-800-693-0351 to receive a:
You need to see DPS gear in action. Get a live demo with our engineers.
Have a specific question? Ask our team of expert engineers and get a specific answer!
Sign up for the next DPS Factory Training!
Whether you're new to our equipment or you've used it for years, DPS factory training is the best way to get more from your monitoring.Reserve Your Seat Today