Save valuable rack space and generate more revenue: The NetGuardian 432 has 32 discrete point inputs, 4 control relays, and an optional D-wire input supporting up to 16 analog sensors.
|Alarm Detection Speed:||Configurable to 100-9000 msec (1/10 second to 9 seconds)|
|Control Outputs:||4 (Form C)|
|Maximum Voltage:||60 VDC/125 VAC|
|Maximum Current:||0.5 Amp, 125 VAC |
1 Amp, 24 VDC
SNMP v1, v2c
DCPx (all versions)
|Interfaces:||Two 50-pin connectors for discrete alarms and control relays |
1 RJ45 10/100BaseT Ethernet Port
1 USB Craft Port
1 Serial Port (Choose from RS232, RS485, 202, or 33.6K Dialup Modem)
(Optional) 1 D-Wire sensor input supporting up to 16 analog sensors
|Power Input:||-48VDC (-36 to -72VDC) |
(Optional) -24VDC (-18 to -36VDC)
(Optional) +24VDC via 110VAC wall transformer (+12 to +30VDC)
|Current Draw:||250 mA|
|Fuse:||3/4 AMP GMT|
|Visual Display:||6 Front Panel LEDs |
1 Rear Panel LED
|Mounting:||19" or 23" rack|
|Dimensions:||1.72" H x 17" W x 5.14" D|
|Weight:||4 lbs. 3oz. (1.9 kg)|
|Operating Temperature:||32 -140 degrees F (0 -60 degrees C)|
|Operating Humidity:||0%-95% non-condensing|
|Download Complete List Here|
|Base NG40 Dual Power (Standard) |
-48VDC (-36 to -72VDC) (Standard)
-24VDC (-18 to -36VDC) (Standard)
|-12VDC Power Option |
-12VDC Power Option Isolated (3rd Party Brick)
|+24VDC via 110VAC Wall Transformer (+12 to +30VDC)|
|RS232 Serial Port |
RS485 Serial Port
|202 / V23 Modem |
|1 D-Wire Sensor Input for 16 Additional Sensors|
|1 Internal Temperature Sensor (On Perimeter - Front of Unit)|
|Wago-4 Pin Wago (Dual Feed)|
|RTC (Real Time Clock)|
Save valuable rack space without sacrificing alarm capacity: Need more capacity than what the NetGuardian 432 G4 can provide? The NetGuardian 480 has all the great features as the NetGuardian 432, but with 80 discrete points instead of 32.
Track changing network conditions with discrete sensors from DPS. Find temperature, motion, door sensors, and more.
D-Wire sensors provide an easy way to track environmentals in your server room, PBX closet, or data center. Your NetGuardian powers and communicates with D-Wire sensors over RJ-11 connections, allowing you to add or remove sensors from your monitoring system quickly and easily.
Wire-Wrap Back Panel
The NetGuardian's Wire-Wrap back panel allows for wire-wrap connections for the discrete alarms, analog alarms, and control relays.
A 66 block is a simple way to use wire-wrap connections with DPS RTUs. When telcos really want connections to stay in place, they use wire wrap. You'll simply punch down your alarm, analog, and/or control relay wiring to the 66 block, then connect the 66 block to the RTU using a standard amphenol cable (also available from DPS).
The wire wrap back panel allows for wire-wrap connections to your NetGuardian's alarms, analog inputs, and control relays.