CellVoice 16: Specifications

The CellVoice 16, with extra controls.
Get cellular voice alerts sent from your sites without LAN.
Full Specifications
Cellular Notification Options: CDMA or GSM
Alarm Point Inputs: 16
Analog Alarms: 8 (4 general purpose, 2 battery monitoring, 1 internal temp, 1 external temp)
Analog Input Range: -90 to 90 VDC (or 4 to 20mA)
Analog Thresholds: 4
Control Relays: 2 to 18, depending on your build option
Serial Ports: 1 (choose from 202, RS-232, RS-485, or RJ-11)
Protocols: SNMPv1, SNMPv2c, DCPx, Telnet, HTTP, Email
Dimensions: 17" W x 6.6" D x 1.7" H
Weight: 2 lbs. 12 oz.
Mounting: Wall or rack mountable
Power Input: -48 VDC (-40 to -70VDC); contact DPS for other power options
Current draw: 50 mA @ -48VDC
Interfaces: 1 RJ45 10BaseT Ethernet port
1 DB9 front panel craft port
1 stereo jack for optional external temp sensor
1 RJ11 Telco jack for dialing in/out
1 serial port (Choose from RS232, RS485, or 202)
Fuse 2 - 1/2 amp GMT
Operating Temperature: 32 -140 F (0 -60 C)
Operating Humidity: 0%-95% non-condensing

Ordering Options

The CellVoice 16, with extra controls.
Get cellular voice alerts sent from your sites without LAN.
Ordering Options
Wireless connectionGSM or CDMA
Control Relays: 2 or 18
Power: -48VDC (Contact DPS for additional power options)
Serial Port: RS232, RS485, or 202 - Choose One
Accessories
External temperature probe with 7-foot lead (D-PR-998-10A-07)

Small SMS Reciever
SMS Receiver

Forward alarms from your wireless RTU to your T/Mon or SNMP Master via SMS notifications. With the SMS Receiver, you can bypass the traditional hassles of cellular alarm reporting by sending SMS alarm notifications from your RTU to your SNMP master.

Discrete and Analog Sensors
Discrete and Analog Sensors

Fuel tanks, battery power, lighting systems, and water levels are just some of things you need to monitor to keep your network up and running. Track changing network conditions with these discrete & analog sensors.

NetGuardian 216 Wall Mount Pluggable Panel

Wall Mount Pluggable Panel

The Wall Mount Pluggable Panel mounts below the NetGuardian and other DPS products to allow for convenient termination access to discrete alarms, control relays, analog inputs, and fuse alarms. This pluggable panel is ideal for uses where the NetGuardian RTU is mounted on a backboard.
(D-PK-16PAN-12002)

66 block 66 block

A 66 block is a simple way to use wire-wrap connections with DPS RTUs. When telcos really want connections to stay in place, they use wire wrap. You'll simply punch down your alarm, analog, and/or control relay wiring to the 66 block, then connect the 66 block to the RTU using a standard amphenol cable (also available from DPS).


Applications

SMS reporting directly to your mobile phone.
The SMS reporting option for many NetGuardian RTUs allows you to report alarms via SMS directly to your phone.


Wireless reporting to the NOC in a single step.
You can also report alarms wirelessly via CDMA/GSM directly to your alarm management system with the SMS Receiver. The SMS Receiver forwards incoming SMS alarm messages as SNMP traps to your alarm master. This saves you the trouble of paying for a third party cellular data provider. You also won't be punching a hole in your firewall to receive alarms from your cellular devices

Need a Quote?

Get it by: 4:15 PM Monday (tomorrow)

Now: 5:11 PM
Next Step:
Send Us Your Quote Request
8:00 AM Monday
We'll Start Work on Your Detailed Quote
4:15 PM Monday
Get Your Quote (Email PDF)

It's 5:11 PM on Friday at our Fresno, CA, USA headquarters. We'll start work on your quote first thing on Monday.

Get a Quote