6720

TBOS-ASCII Combiner

The TBOS-ASCII Combiner (TAC) is not currently available.

If you have need for a product like this, call 1-800-693-0351 to discuss your options with a sales engineer. Alternatively, you may view available DPS products...

TAC
TBOS-ASCII Combiner (TAC): Increase network efficiency by combining TBOS alarm data and ASCII maintenance data on a single channel.

Summary of Features

up arrow top


Overview

TBOS-ASCII Combiner (TAC) increases network efficiency by combining TBOS alarm data and ASCII maintenance data on a single channel. You can put it to work on your network to support switches, PABXs, MUXs, fiber terminals, radios and other devices that use an ASCII "Craft Port" for maintenance and a TBOS serial port for alarms. Many users assign an unused "order-wire" channel for the TAC functions, making more channels available for revenue traffic and increasing maintenance accessibility to remote equipment.

COS Reporting
Using their extensive knowledge of TBOS reporting, DPS engineers have devised a change-of-state reporting scheme for the TAC. The slave TAC, located at the customer premise, transmits TBOS alarm data only when a point changes status and on preprogrammed "update" cycles. The master TAC, located at your central office, maintains an up-to-date database for instantaneous response to your TBOS alarm system. Because it is not constantly transferring TBOS data, the communications link is available for ASCII data transfer. When craft port maintenance is required, simply plug a laptop computer or other maintenance terminal into the master TAC's ASCII port and proceed with the task. TBOS alarms will continue to be reported, without any noticeable delay.

Discrete Alarm and Control Points
The TAC also provides four alarm points and two control points at each end that can be used for conventional alarms or for "point echo" applications.

"400" Module TAC
Multiple TACs can be clustered together at a central office "master" location with the MAS (Modular Alarm System) version of the TAC. Up to 12 TACs can be located in a single 400-shelf mounting, conserving space and power. In addition, other modules from the MAS product line can be used to mediate the TBOS data to TL1.

Display Mapping
TBOS data from the remote device can be remapped to any of the eight TBOS displays available on a TBOS port. This reduces the number of TBOS ports needed to gather alarms by allowing full utilization of all available displays on a TBOS port.

up arrow top


Options & Model Numbers

Description Model Number
TBOS-ASCII Combiner: TACs come standard with T/TAC software & cable ends. Operates on -48 volt office battery. D-PC-225-10B-5X
TAC Mounting Block: Bracket to mount TAC on flat surface of office superstructure. D-RK-135-10A-00

up arrow top


Get a Custom Application Diagram of Your Perfect-Fit Monitoring System

There is no other network on the planet that is exactly like yours. For that reason, you need to build a monitoring system that's the right fit for you.

"Buying more than you need" and "buying less than you need" are real risks. You also have to think about training, tech support, and upgrade availability.

Send me a quick online message about what you're trying to accomplish. I'll work with you to build a custom PDF application diagram that's a perfect fit for your network.


Make an Informed Decision


Your network isn't off-the-shelf.

Your monitoring system shouldn't be, either.

Customized monitoring application drawing

We'll walk you through this with a customized monitoring diagram.

Just tell us what you're trying to accomplish with remote monitoring.

Get a Custom Diagram