Product Overview: NetGuardian ENV
The NetGuardian ENV: An RTU and Building Access support in one.
Get detailed Alarm Information, plus building access support - all in 1 ru!
- 8 discrete inputs.
- Up to 6 user analog channels and 2 input voltage monitoring channels.
- Up to 4 control relay outputs.
- SNMP v1, v2, or v3 trap notifications.
- Supports up to 15 D-Wire sensors.
- Optional Telco Modem.
- RS232 reach-through for legacy -device management.
- Full support for HID proxy reader for remote door access.
- Front-facing ports for alarm termination for easy installation and maintenance.
- Integrated web browser interface for convenient configuration and management.
- Slim 1 RU form factor saves rack space
- Free lifetime firmware upgrades
The NetGuardian ENV back panel.
The NetGuardian ENV is perfect for smaller sites that want the capabilities of a time tested RTU design and need building access support.
|Protocols:||SNMP v1, v2c, v3.|
|Analog Inputs:||6 user analog channels and 2 input voltage monitoring channels (8 total).|
|Analog Input Range:||-92 to +92 VDC of 4 - 20mA.|
|Analog Accuracy:||+/- 1% of actual value.|
|Control Outputs:||6 form A (optional).|
|Max Voltage:||60 VDC/120 VAC.|
|Max Current:||1 Amp, AC/DC.|
|Interface:||1 RJ45 10/100 BaseT full-duplex. |
1 USB front-panel craft port.
1-4 RJ11 Connector for D-Wire sensor network (optional).
1 RJ11 Connector for Telco.
|Visual Interface:||7 front panel LCDs|
|Dimensions:||1.75"H x 17"W x 5.625"D (4.5 cm x 43.2 cm x 14.3 cm)|
|Weight:||2 lbs. 5 oz. (1.063 kg)|
|Mounting:||19" or 23" rack|
|Power Input:||+/- 24 to 48 VDC|
|Current Draw:||60 mA @ 24VDC|
|Operating Temperature:||32 to 140 degrees F (0 to 60 degrees C)|
|Operating Humidity:||0%-95% noncondensing|
|Power Inputs||-24 VDC nominal (-18 to -36 VDC) |
-24/-48 VDC (-18 to -58 VDC) Wide Range.
+24 VDC (+18 to +36 VDC)
+12 VDC (+11 to +18 VDC)
Power Over Ethernet (POE)
|Modem||33.6 K internal (Optional Build)|
|Discretes||6 alarms and 2 controls (Optional Build)|
|Analogs||8 (Optional Build)|
|D-Wire Support||1 built in temp sensor.|
|D-Wire Support |
The NetGuardian ENV can support up to 15 D-Wire Sensors. Even if your site is small, the NetGuardian ENV can help you monitor site temperature, humidity levels and more.
|HID Proxy Reader with Keypad |
The NetGuardian ENV can support a proxy reader with keypad, such as this HID proxy reader. This gives you the capability to control building access with the use of key cards.
Need a Quote?
Get it by: 4:15 PM Friday (today)
Send Us Your Quote Request
We'll Start Work on Your Detailed Quote
Get Your Quote (Email PDF)
It's 4:34 AM on Friday at our Fresno, CA, USA headquarters. It's early in the morning, but we'll start on your quote as soon as we get into the office.