AlphaMax 82A and 82S

The AlphaMax 82S is a compact dial-up alarm system remote. The 82S is generally used with equipment such as radio equipment where you have discrete alarms and a serial provisioning port. The 82S would notifiy you via pager about the problem. You can then dial in using the same phone facility to reach through and provision or correct the problem.

AlphaMax Unit
Notification types include alphanumeric &
numeric pager and text message.

Alarms can be communicated to an alphanumeric or numeric pager or they can be forwarded to a monitoring center equipped with an alarm management system. Because the AlphaMax is configured by downloading from a remote PC, maintenance and upgrades become routine.

Configuration Software

Alphanumeric Pager or Cellphone

Configuring AlphaMax is easy using T/Alpha software for Windows. T/Alpha will also monitor alarm inputs and operate control relays.

AlphaMax's opto isolated alarm inputs are normally in the "active state" when grounded (current flowing). Alarm points can be individually "reversed" by remote programming to assume the Active State when ungrounded (no current flowing). Each alarm input can be configured for unipolar operation (reports going to alarm state only) or bipolar operation (reports both going to alarm state and returning to cleared state).

Each point can also have a 30 character description (ex: "Room Too Hot!"), a qualification time period before dialing primary and backup pager numbers. A redial option causes the unit to dial a pager up to 15 times in case of no answer.

Personnel with pagers can call into the AlphaMax from a dial tone (DTMF) phone and acknowledge alarms, operate control points and request a status report.

Derived Controls

In addition to being activated remotely, control relays may be activated internally by a combination of existing alarms, based on a programmable equation (derived control). Each control point may have up to two equations defined.

The AlphaMax uses an internal 300/1200 baud "AT 212" type modem. The control relay outputs are Form "C". A high speed version that has a 33.6K modem is also available (See ordering options).


AlphaMax Application
AlphaMax can report alarms to a variety of devices, and it is an excellent tower light monitoring solution.

Mobile Alarm


Want more information? We have an Auto-dialer white paper.

AlphaMax Unit
Notification types include alphanumeric & numeric pager and text message.

Get a Custom Application Diagram of Your Perfect-Fit Monitoring System

There is no other network on the planet that is exactly like yours. For that reason, you need to build a monitoring system that's the right fit for you.

"Buying more than you need" and "buying less than you need" are real risks. You also have to think about training, tech support, and upgrade availability.

Send me a quick online message about what you're trying to accomplish. I'll work with you to build a custom PDF application diagram that's a perfect fit for your network.

Make an Informed Decision

Your network isn't off-the-shelf.

Your monitoring system shouldn't be, either.

Customized monitoring application drawing

We'll walk you through this with a customized monitoring diagram.

Just tell us what you're trying to accomplish with remote monitoring.

Get a Custom Diagram