The T1 Monitor provides unobtrusive monitoring of T1 signals. This unit reports error conditions (via LAN) that are detected in either direction. With support for two channels of T1 (with the option for up to four potentially available), you'll be capable of adequately monitor your T1 lines.
Communication or error conditions include the following types of alarms:
Error notifications can be configured to send via SNMP and/or email. The unit also features LEDs, to provide local visibility of error conditions.
The T1 cable terminates on the unit using RJ48 connectors and supports built-in cross over of transmit and receive signals between RJ connectors to facilitate cabling. The unit is provisioned and managed via an easy-to-use web browser.
Note: This unit requires a minimum order.
|Alarms:||Two Channel Monitor.|
|Interfaces:||4 RJ48 ports. |
1 10BaseT half-duplex LAN port.
1 DB9 Craft port.
|Power Input:||Dual +24 VDC.|
|Fuse:||3/4 Amp GMT.|
|Visual Interface:||LCD Display (optional). |
2 Front panel LEDs.
14 Back panel LEDs.
|Mounting:||19" or 23" rack.|
|Dimensions:||1.75"H x 17"W x 12"D.|
|Operating Temperature:||32 - 140 degrees F (0 - 60 degrees C).|
|Operating Humidity:||0 - 95% non-condensing.|
Call 1-800-622-3314 or email firstname.lastname@example.org. You can also send a message to Mac Smith using the quick form below.
To receive a price quote or ROI analysis...
You need to see DPS gear in action. Get a live demo with our engineers.
Check out our White Paper Series!
A complete library of helpful advice and survival guides for every aspect of system monitoring and control.
Have a specific question? Ask our team of expert engineers and get a specific answer!
Sign up for the next DPS Factory Training!
Whether you're new to our equipment or you've used it for years, DPS factory training is the best way to get more from your monitoring.Reserve Your Seat Today