--  Title:    DPS-TEXT-RTU.MIB
--  Version:  v1.0 for SNMPv2c
--
--  Copyright @ 2011 DPS Inc. All Rights Reserved
--
--  This MIB defines objects for the DPS TEXT RTU products.
--
-- DPS CBH 8/2011
--

DPS-TEXT-RTU-MIB DEFINITIONS ::= BEGIN

IMPORTS
	DisplayString
		FROM SNMPv2-TC
	OBJECT-TYPE
		FROM SNMPv2-SMI
	NOTIFICATION-TYPE
		FROM SNMPv2-SMI
	Integer32
		FROM SNMPv2-SMI
	dpsAlarmControl
		FROM DPS-MIB-V38;

dpsTEXTRTUv2 OBJECT IDENTIFIER ::= {dpsAlarmControl 5}

dpsTEXTRTUv2Ident OBJECT IDENTIFIER ::= {dpsTEXTRTUv2 1}

--Textual Conventions

AnalogThresholds ::= TEXTUAL-CONVENTION
        STATUS          current
        DESCRIPTION "Highest threshold level crossed, if MJ, MN is assumed.  Will be blank if alarm is not from an analog sources"
        SYNTAX INTEGER {
                noAlarms	(0),
				minorUnder	(1),
				minorOver	(2),
				majorUnder	(3),
				majorOver	(4)
        }
		
RTUCAction ::= TEXTUAL-CONVENTION
        STATUS          current
        DESCRIPTION "Requested action.  Latch, release, and momentary will affect relays.  Sync(s) will resend traps for currently active alarms(TEXT RTU will ignore if invalid)."
        SYNTAX INTEGER {
                latch(1),
				release(2),
				momentary(3),
				syncStanding(4),
				syncAnalogs(5)
        }

--Device identifying objects

dpsTEXTRTUv2DateTime OBJECT-TYPE
	SYNTAX  DisplayString
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION "The RTU system date and time."
	::= {dpsTEXTRTUv2Ident  1}

dpsTEXTRTUv2DeviceType OBJECT-TYPE
	SYNTAX DisplayString
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION "Device type of far end SMS device as received in SMS messages to SMS receiver.  ie NG216_G3"
	::= {dpsTEXTRTUv2Ident  2}

dpsTEXTRTUv2Phone OBJECT-TYPE
	SYNTAX  DisplayString
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION "The phone number of the far end or originating SMS RTU, only SMS RTUs will have/respond to this variable"
	::= {dpsTEXTRTUv2Ident 3}

	
-- Alarm identifying objects

dpsTEXTRTUv2AlarmGrid OBJECT IDENTIFIER ::= {dpsTEXTRTUv2 2}

dpsTEXTRTUv2ADisplay OBJECT-TYPE
	SYNTAX  Integer32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION "TEXT RTU display number.  See the usermanual for display mapping information"
	::= {dpsTEXTRTUv2AlarmGrid 1}

dpsTEXTRTUv2APoint OBJECT-TYPE
	SYNTAX  Integer32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION "TEXT RTU point number.  See the usermanual for point mapping information"
	::= {dpsTEXTRTUv2AlarmGrid 2}

dpsTEXTRTUv2APntDesc OBJECT-TYPE
	SYNTAX  DisplayString
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION "A description of this point."
	::= {dpsTEXTRTUv2AlarmGrid 3}

dpsTEXTRTUv2AState OBJECT-TYPE
	SYNTAX  DisplayString
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION "The current state of this point."
	::= {dpsTEXTRTUv2AlarmGrid 4}

dpsTEXTRTUAnalogvalue OBJECT-TYPE
	SYNTAX  DisplayString
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION "The current value of the channel.  Will be blank if alarm is not from an analog source"
	::= {dpsTEXTRTUv2AlarmGrid 5}		

dpsTEXTRTUAnalogthresholds OBJECT-TYPE
	SYNTAX  AnalogThresholds
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION "Highest threshold level crossed, if MJ, MN is assumed.  Will be blank if alarm is not from an analog sources"
	::= {dpsTEXTRTUv2AlarmGrid 6}
	
-- TEXT RTU Control Commands
	
dpsTEXTRTUv2ControlGrid OBJECT IDENTIFIER ::= {dpsTEXTRTUv2 3}

dpsTEXTRTUv2CDisplay OBJECT-TYPE
	SYNTAX  Integer32
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION "RTU_port_address display number."
	::= {dpsTEXTRTUv2ControlGrid 1}

dpsTEXTRTUv2CPoint OBJECT-TYPE
	SYNTAX  Integer32 (1..64)
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION "RTU_port_display point number (1-64)."
	::= {dpsTEXTRTUv2ControlGrid 2}

dpsTEXTRTUv2CMOMTime OBJECT-TYPE
	SYNTAX  Integer32
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION "Momentary latch time (in milliseconds).  If value is blank, the default of 600ms will be used"
	::= {dpsTEXTRTUv2ControlGrid 3}

dpsTEXTRTUv2CAction OBJECT-TYPE
	SYNTAX  RTUCAction
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION "Requested action.  Latch, release, and momentary will affect relays.  Sync(s) will resend traps for currently active alarms(TEXT RTU will ignore if invalid)."
	::= {dpsTEXTRTUv2ControlGrid 4}
	
	
-- DPS SMS RTU traps.  Traps generated from SMS receiver indicating event on far end SMS RTU

dpsTEXTRTUv2AlarmSet NOTIFICATION-TYPE
	OBJECTS {	sysDescr, sysLocation, dpsTEXTRTUv2DateTime, dpsTEXTRTUv2DeviceType, dpsTEXTRTUv2Phone, dpsTEXTRTUv2ADisplay, dpsTEXTRTUv2APoint, dpsTEXTRTUv2APntDesc, dpsTEXTRTUv2AState, dpsTEXTRTUAnalogvalue }
    STATUS current
	DESCRIPTION "Generated when alarm is received from far end SMS device to SMS receiver."
    ::= { dpsTEXTRTUv2 100 }

dpsTEXTRTUv2AlarmClear NOTIFICATION-TYPE
	OBJECTS {	sysDescr, sysLocation, dpsTEXTRTUv2DateTime, dpsTEXTRTUv2DeviceType, dpsTEXTRTUv2Phone, dpsTEXTRTUv2ADisplay, dpsTEXTRTUv2APoint, dpsTEXTRTUv2APntDesc, dpsTEXTRTUv2AState, dpsTEXTRTUAnalogvalue }
    STATUS current
	DESCRIPTION "Generated when clear is received from far end SMS device to SMS receiver."
    ::= { dpsTEXTRTUv2 200 }

END