NetMediator T2S

NetMediator-T2S
The NetMediator T2S: TBOS-to-SNMP mediation for up to 8 TBOS devices, plus terminal server functionality, 32 discrete alarms, 8 analog alarms, and 8 controls.
Get Detailed Alarm Information - Send the Right Technician With the Right Tools on the First Dispatch
  • Mediates 8 TBOS devices to SNMP.
  • Support for up to 16 D-Wire sensors.
  • Mediated TBOS provides more detailed, useful information than major/minor alarms-isolate equipment problems before the first dispatch.
  • 4 reach-through serial ports for Telnet operation of network elements.
  • 32 reversible discrete alarms, 8 analog inputs (voltage/current), and 8 controls.
  • Remote access.
  • Monitor actual analog temperature and battery levels.
  • Easy configuration.
  • Local audible and visual alarm notification.
  • Slim 1 RU form factor saves rack space.
  • Free lifetime firmware upgrades.

Full Specifications

NetMediator-T2S Back Panel
The powerful NetMediator-T2S with some of the many available options.

The NetMediator-T2S can be used to collect legacy TBOS or TABS alarms using network bandwidth instead of expensive dedicated copper. The power of the Net Mediator is only limited by your imagination.

Full Specifications
Protocols: SNMP and TBOS
Discrete Inputs: 32
Analog Inputs: 8 standard or 16 D-Wire sensors
Analog Input Range: -70 to 94 VDC or 4 to 20 mA
Analog Accuracy: +/- 1% of actual value
Control Outputs: 8
Max Voltage: 60 VDC/120 VAC
Max Current: 1 Amp, AC/DC
Interface: 4 RS-422/RS-485 TBOS ports
4 RS-232 serial reach-through ports
2 50-pin connectors
1 4-pin connector
1 RJ45 10BaseT Ethernet port
1 RJ11 POTS jack
1 DB9F craft port
Visual Interface: 18 LEDs, LCD display
Dimensions: 1.75"H x 17"W x 12"D (4.5 cm x 43.2 cm x 30.5 cm)
Weight: 4 lbs. 3 oz. (1.9 kg)
Mounting: 19" or 23" rack
Power Input: +24 VDC
Current Draw: 200 mA
Fuse: 0.75 Amp GMT
Operating Temperature: 32 to 140 degrees F (0 to 60 degrees C)
Operating Humidity: 0%-95% noncondensing

Find temperature, humidity, and many other discrete and analog sensors for your DPS RTUs.


Ordering Options

NetMediator-T2S Back Panel

The NetMediator-T2S can be used to collect legacy TBOS or TABS alarms using network bandwidth instead of expensive dedicated copper. The power of the Net Mediator is only limited by your imagination.

Find temperature, humidity, and many other
discrete and analog sensors for your DPS RTUs.

SiteMON IP SiteMon IP Surveillance Camera

With this camera and RTU in one, you don't need to wonder what's going on at your sites. Connecting directly to the NetGuardian's optional LAN switch, the new SiteMON IP enables you to make security decisions remotely, allowing you to dispatch on-call staff, security, or even police. Available with or without an outdoor enclosure.

66 block 66 block

A 66 block is a simple way to use wire-wrap connections with DPS RTUs. When telcos really want connections to stay in place, they use wire wrap. You'll simply punch down your alarm, analog, and/or control relay wiring to the 66 block, then connect the 66 block to the RTU using a standard amphenol cable (also available from DPS).

Related Products

Need a Quote?

Get it by: 4:15 PM Thursday (today)

Now: 3:44 AM
Next Step:
Send Us Your Quote Request
8:00 AM Thursday
We'll Start Work on Your Detailed Quote
4:15 PM Thursday
Get Your Quote (Email PDF)

It's 3:44 AM on Thursday at our Fresno, CA, USA headquarters. It's early in the morning, but we'll start on your quote as soon as we get into the office.

Get a Quote