Overview: NetGuardian DX G5

NetGuardian DX G5 Expansion Unit
Up to three NetGuardian DX G5 Expansion Units can be daisy-chained from a single, base NetGuardian.

The NetGuardian DX G5 Expansion Units are low-cost, self-contained devices that provide compatible NetGuardian series remotes with additional ground-activated discrete alarms, analogs alarms, and control relays. With the NetGuardian DX expansions, your NetGuardian RTU can scale to the needs of your site, so you don't have to deploy new RTUs as your needs grow. Adding up to 3 NetGuardian 832A DX expansion units to your compatible NetGuardian RTU will increase your capacity by 96 discrete points, 24 analog inputs, and 24 control relays.

NetGuardian Daisy Chain

Each unit is equipped with dual RS232 ports for easy installation and daisy-chaining.

  • Low cost method of expansion to existing NetGuardian units
  • Gives additional capacity over existing communication lines
  • Report more alarms from the same address
  • Expand at your own pace
  • RS232 ports allow for easy daisy chaining between units
  • LED indications of alarms and communications status

Stand Alone as an RTU


Full Specs

NetGuardian DX G5 Expansion Unit Back Panel

Up to three NetGuardian DX G5 Expansion Units can be added to a compatible NetGuardian RTU, providing 96 additional alarm points, 24 analogs, and 24 control relays.

Find temperature, humidity, and many other
discrete and analog sensors for your DPS RTUs.

Full Specifications
Discrete Inputs: 32
Analog Inputs: 8
Control Outputs: 8 Relay contacts
Maximum Voltage: 60 VDC/120 VAC
Maximum Current: 1 Amp, AC/DC
Expandability: DX 48 & DX 832 (additional analogs)
Protocol: DCPX
Interfaces:

1 DB9 Craft Connector 1 RJ45 Connector for RS232
1 RJ12 Connector for RS232
2 50 Pin connectors for discrete alarms, controls, and analogs 1-6
1 4-pin connector for analogs 7-8

Power Input:

-48VDC (-40 to -70VDC)
(Optional)-24VDC
(Optional) Wide range (-18 to -72VDC)

Current Draw: 250mA
Fuse: 3/4 Amp GMT
Mounting: 19" or 23" rack
Dimensions: 1.72" H x 17" W x 8.136" D
Weight: 3 lbs. 15 oz. (1.8 kg)
Operating Temperature: 41-95 F (0-60 C)
Operating Humidity: 0%-95% non-condensing

Ordering Options

NetGuardian DX G5 Expansion Unit
This is the NetGuardian 864 DX G5 Expansion Unit. It can be daisy-chained from a compatible base NetGuardian. Up to three NetGuardian DX G5 Expansion Units can be daisy-chained to increase your monitoring capacity.

NetGuardian DX Expansion As A Stand-Alone RTU: Use This Application To Add 48 Discrete Points To Any Given Site...

Use The NetGuardian DX Discrete Expansion as a Stand-Alone RTU With T/Mon and Gain 48 Discrete Points...
Use The NetGuardian DX Discrete Expansion as a Stand-Alone RTU With T/Mon and Gain 48 Discrete Points...

Equipment Used:

How This Application Works:

In this application, the NetGuardian DX Expansion can act as a stand-alone RTU. To do this, the DX Expansion connects directly to T/Mon NOC and adds an additional 48 discrete points at any given site. This is achieved by connecting the NetGuardian DX to T/Mon using an RS-232 Serial connection at 2400 baud on any of T/Mon's unused ports. Use address ports 1, 2, or 3 and you've just added 48 discrete points over DCPx protocol.


Need a Quote?

Get it by: 4:15 PM Friday (tomorrow)

Now: 10:37 PM
Next Step:
Send Us Your Quote Request
8:00 AM Friday
We'll Start Work on Your Detailed Quote
4:15 PM Friday
Get Your Quote (Email PDF)

It's 10:37 PM on Thursday at our Fresno, CA, USA headquarters. It's late in the day, but we promise to start on your quote first thing in the morning.

Get a Quote