The NetGuardian DX G5 Expansion Units are low-cost, self-contained devices that provide compatible NetGuardian series remotes with additional ground-activated discrete alarms, analogs alarms, and control relays. With the NetGuardian DX expansions, your NetGuardian RTU can scale to the needs of your site, so you don't have to deploy new RTUs as your needs grow. Adding up to 3 NetGuardian 832A DX expansion units to your compatible NetGuardian RTU will increase your capacity by 96 discrete points, 24 analog inputs, and 24 control relays.
Each unit is equipped with dual RS232 ports for easy installation and daisy-chaining.
Stand Alone as an RTU
Up to three NetGuardian DX G5 Expansion Units can be added to a compatible NetGuardian RTU, providing 96 additional alarm points, 24 analogs, and 24 control relays.
|Control Outputs:||8 Relay contacts|
|Maximum Voltage:||60 VDC/120 VAC|
|Maximum Current:||1 Amp, AC/DC|
|Expandability:||DX 48 & DX 832 (additional analogs)|
1 DB9 Craft Connector 1 RJ45 Connector for RS232
|Power Input:|| |
-48VDC (-40 to -70VDC)
|Fuse:||3/4 Amp GMT|
|Mounting:||19" or 23" rack|
|Dimensions:||1.72" H x 17" W x 8.136" D|
|Weight:||3 lbs. 15 oz. (1.8 kg)|
|Operating Temperature:||41-95 F (0-60 C)|
|Operating Humidity:||0%-95% non-condensing|
In this application, the NetGuardian DX Expansion can act as a stand-alone RTU. To do this, the DX Expansion connects directly to T/Mon NOC and adds an additional 48 discrete points at any given site. This is achieved by connecting the NetGuardian DX to T/Mon using an RS-232 Serial connection at 2400 baud on any of T/Mon's unused ports. Use address ports 1, 2, or 3 and you've just added 48 discrete points over DCPx protocol.
Get it by: 4:15 PM Monday (today)
It's 6:22 AM on Monday at our Fresno, CA, USA headquarters. It's early in the morning, but we'll start on your quote as soon as we get into the office.