9303
Previous Page: Product Showcase: NetGuardian 216 Specifications
PDFDownload White Paper

NetGuardian 480

NetGuardian 480

The low-cost, easy-to-implement solution to monitoring your entire site with just one unit - for SNMP or TL1

The NetGuardian 480 (NG 480) is a specialized member of the NetGuardian family, optimized for use as a high-capacity discrete-only responder. The result is a highly cost-effective solution for gathering the diverse equipment at your remote site and integrating it into a single modern network management system.

With 80 discrete alarm inputs - 2½ times as many as the NetGuardian 832A- you can easily forward all the alarms of a small to medium-sized site. This dense alarm coverage gives you the convenience of a single-box solution, saves you the cost of buying multiple low-capacity RTUs, and offers you the lowest possible cost per point.

• 80 discrete inputs - cover your entire site with a single unit

• Convenient single-box solution saves costs of buying multiple units - economical cost per point

• Reports to multiple SNMP managers, TL1 manager, or T/Mon NOC

• TL1 over TCP/IP

• Four control relays for controlling site equipment and security devices

• Configurable alarm descriptions include detailed, actionable alarm data in SNMP traps or TL1 autonomous |messages

• Free Windows 2000/XP software for editing TL1 database, configuration, monitoring, diagnostics, and testing

• Standard dual -48 VDC power inputs for redundant power facilities

• Free lifetime firmware upgrades

NetGuardian 480a Application Drawing

Versatility and power: The NetGuardian 480 collects alarms from all the diverse equipment at your remote site and reports to multiple SNMP managers, your TL1 manager or T/Mon NOC

NetGuardian 480 back panel

NetGuardian 480 Specifications

Protocols: SNMP, TL1, DCP, DCPx, DCPf, DCP1

Discrete Inputs: 80

Alarm Detection Speed: Configurable to 100-9000 msec (1/10 second to 9 seconds)

Control Outputs: 4 relay contacts, 2 Form A, 2 Form C

Maximum Voltage: 60 VDC/125 VAC

Maximum Current: 0.5 Amp, 125 VAC
1 Amp, 24 VDC

Interfaces:
Two 50-pin connectors for discrete alarms and control relays
1 RJ45 Ethernet jack
1 DB9 craft port
1 RJ11 serial port jack

Visual Display: 6 LEDs

Dimensions: 1.75" H x 17" W x 12" D
(4.5 cm x 43.2 cm x 30.5 cm)

Weight: 4 lbs. 3oz. (1.9 kg)

Mounting: 19" or 23" rack

Power Input: -48VDC (-40 to -70 VDC)

Current Draw: 250 mA

Fuse: 0.5 Amp GMT

Operating Temperature: 32°-140° F (0°-60° C)

Operating Humidity: 0%-95% non-condensing

T/Config

Next Page: Product Showcase: Remote Alarm Block 176N
PDFDownload White Paper

Find the Answers to Your Questions


Previous Page: Product Showcase: NetGuardian 216 Specifications
PDFDownload White Paper

NetGuardian 480

NetGuardian 480

The low-cost, easy-to-implement solution to monitoring your entire site with just one unit - for SNMP or TL1

The NetGuardian 480 (NG 480) is a specialized member of the NetGuardian family, optimized for use as a high-capacity discrete-only responder. The result is a highly cost-effective solution for gathering the diverse equipment at your remote site and integrating it into a single modern network management system.

With 80 discrete alarm inputs - 2½ times as many as the NetGuardian 832A- you can easily forward all the alarms of a small to medium-sized site. This dense alarm coverage gives you the convenience of a single-box solution, saves you the cost of buying multiple low-capacity RTUs, and offers you the lowest possible cost per point.

• 80 discrete inputs - cover your entire site with a single unit

• Convenient single-box solution saves costs of buying multiple units - economical cost per point

• Reports to multiple SNMP managers, TL1 manager, or T/Mon NOC

• TL1 over TCP/IP

• Four control relays for controlling site equipment and security devices

• Configurable alarm descriptions include detailed, actionable alarm data in SNMP traps or TL1 autonomous |messages

• Free Windows 2000/XP software for editing TL1 database, configuration, monitoring, diagnostics, and testing

• Standard dual -48 VDC power inputs for redundant power facilities

• Free lifetime firmware upgrades

NetGuardian 480a Application Drawing

Versatility and power: The NetGuardian 480 collects alarms from all the diverse equipment at your remote site and reports to multiple SNMP managers, your TL1 manager or T/Mon NOC

NetGuardian 480 back panel

NetGuardian 480 Specifications

Protocols: SNMP, TL1, DCP, DCPx, DCPf, DCP1

Discrete Inputs: 80

Alarm Detection Speed: Configurable to 100-9000 msec (1/10 second to 9 seconds)

Control Outputs: 4 relay contacts, 2 Form A, 2 Form C

Maximum Voltage: 60 VDC/125 VAC

Maximum Current: 0.5 Amp, 125 VAC
1 Amp, 24 VDC

Interfaces:
Two 50-pin connectors for discrete alarms and control relays
1 RJ45 Ethernet jack
1 DB9 craft port
1 RJ11 serial port jack

Visual Display: 6 LEDs

Dimensions: 1.75" H x 17" W x 12" D
(4.5 cm x 43.2 cm x 30.5 cm)

Weight: 4 lbs. 3oz. (1.9 kg)

Mounting: 19" or 23" rack

Power Input: -48VDC (-40 to -70 VDC)

Current Draw: 250 mA

Fuse: 0.5 Amp GMT

Operating Temperature: 32°-140° F (0°-60° C)

Operating Humidity: 0%-95% non-condensing

T/Config

Next Page: Product Showcase: Remote Alarm Block 176N
PDFDownload White Paper

We're here to help.

1-800-693-0351

Have a specific question? Ask our team of expert engineers and get a specific answer!

Ask an Expert DPS Telecom

Click here for more information.

Get the Alarm Fundamentals White Paper

Download our free Monitoring Fundamentals Tutorial.

An introduction to Monitoring Fundamentals strictly from the prospective of telecom network alarm management.

Download Alarm Fundamentals White Paper

Click here for more information.