Monitor Small Sites Without Overspending On Excess Alarm Capacity

If you think you can't monitor small sites cost-effectively, the NetGuardian 216 will change your mind .

Are you monitoring your small sites? Do you think you can't afford to? The light-capacity LAN-based NetGuardian 216 for SNMP, TL1, and DCP makes it possible to install network monitoring anywhere in your network, without spending a fortune on excess alarm capacity.

NetGuardian 216: The perfect solution to monitor small sites.
16 discretes, 2 analogs, 2 controls and 1 serial reach-through port: the NetGuardian 216 is the exactly the right capacity for your small sites.

Monitor small sites so they don't become network blind spots

Some network managers don't monitor small sites like remote huts, collocation racks or enclosed cabinets. Some don't even monitor large sites if they have fewer than 32 alarm points.

It's a major mistake to not monitor small sites. Problems can happen anywhere. Every blind spot in your network visibility, no matter how small, is a place where you won't know about problems until equipment finally fails.

With the density of modern equipment, site size is often a poor indicator of outage impact. Even small-scale network outages can erode your revenue. Recurring equipment failures at small sites can eat away your repair and equipment budgets.

Proactive companies are now actively looking to monitor small sites to avoid these problems.

Think about your smaller sites and ask yourself: Can I afford expensive damage to this equipment? Will my network stay up if this site shuts down?

NetGuardian 216: the cost-effective solution to monitor small sites
So why do network managers run the risks of not monitoring their smaller sites? Because they think they can't monitor small sites cost-effectively.

They think that network monitoring always means high capacity RTUs, dedicated lines, and man-hours spent on configuration and databasing.

The NetGuardian 216 makes that kind of thinking obsolete. With 16 discretes, 2 analogs, 2 controls and 1 reach-through port , the NetGuardian 216 is exactly the right capacity to monitor small sites. You get the alarm capability you need without spending a fortune on alarm capacity you won't use.

Monitor small sites without compromises

Light capacity doesn't mean light on features or on quality. The NetGuardian 216 is a scaled-down version of our popular NetGuardian 832A, and includes features you'd usually find only on complex, high capacity remotes.

  • Support for SNMP, TL1, and DCP(f/x): The NetGuardian 216 reports alarms to any SNMP manager, TL1 master, or the TMon/IAM Remote Alarm Monitoring System
  • Reach-through serial port: The NetGuardian 216 acts as a one-port terminal server, giving you convenient LAN access to a switch, router, PBX, or other equipment.
  • Four-threshold analog monitoring: The NetGuardian 216's analog inputs feature four separate thresholds for each analog channel (major over, minor over, minor under, and major under), giving you the best visibility of battery levels, temperature, humidity, and other variables.
  • Real-time clock: Synchronized to Internet Time Protocol, the NetGuardian 216's internal clock ensures accurate date/time stamping of alarms and SNMP traps.

Easy installation anywhere in your network

The NetGuardian is easy to install and configure, making it simple to add network monitoring capability anywhere in your network:

NetGuardian 216 configuration software - easy setup to monitor small sites
The NetGuardian 216's included Windows software makes configuration quick and simple.
  • Ethernet connectivity: The NetGuardian 216's plug-and-play installation puts alarm visibility anywhere your LAN goes.
  • Included Windows configuration software: Turning up the NetGuardian 216 is simple and quick, and you can use the same utility for monitoring, communication diagnostics, and loading new firmware.
  • Optional -48 VDC power inputs or 110 VAC commercial power: The NetGuardian 216 is equally suited for telco equipment rooms or ordinary offices.

Lifetime support, free upgrades, and money-back guarantee

You're not taking any risks when you purchase a NetGuardian 216. Your unit is fully backed by DPS Telecom support, including:

  • 24 hour tech support
  • 2 year hardware warranty
  • Free lifetime firmware upgrades
  • 30-day, no-risk, money-back guarantee: If you buy a NetGuardian 216 and you're dissatisfied for any reason during the first 30 days, just return it for a full refund.

Get full specifications and applications for the NetGuardian 216

Get all the details about the NetGuardian 216 and learn all the ways you can use the NetGuardian 216 to securely manage your small remote sites. Visit the NetGuardian 216 product page.

Call 1-800-693-0351 to receive a:

  • Price quote
  • Free web demonstration
  • ROI estimate

See Also:

Need a Quote?

Get it by: 4:15 PM Wednesday (today)

Now: 2:04 AM
Next Step:
Send Us Your Quote Request
8:00 AM Wednesday
We'll Start Work on Your Detailed Quote
4:15 PM Wednesday
Get Your Quote (Email PDF)

It's 2:04 AM on Wednesday at our Fresno, CA, USA headquarters. It's early in the morning, but we'll start on your quote as soon as we get into the office.

Get a Quote