Battery Voltage Monitor: BVM 48

Battery Voltage Monitor (BVM) 48 G2(front panel)
The BVM 48 G2 monitors up to two strings of 24 cells (48 total cells total) and reports threshold alarms via SNMP.

Effective, easy-to-install, light-capacity voltage monitoring

  • Monitor 48 individual battery cell voltages, so you can see developing problems before they impact the entire battery string
  • Report alarms via industry-standard SNMP (v1 or v2c) to your SNMP manager, or the T/Mon alarm management platform.
  • Using simple RJ11 cables you can daisy chain up to 48 sensors
  • Use the built-in web browser to easily monitor battery voltages and temperatures from any PC on the network
  • Get very accurate readings (even over a small voltage range)
  • Track both instantaneous readings and historical trending with the analog logging feature
  • Alternate configuration: Integrate the BVM with a NetGuardian RTU to report battery voltages, system alarms, and environmental levels from a single IP address
  • RoHS 5 approved, for overseas clients requiring RoHS compliant units
  • E-mail and text message (via email) notifications
  • Free lifetime firmware upgrades

This RTU was designed for one reason: Monitor your battery cell voltage and temperature for the best visibility over your power supplies. The BVM 48 G2 monitors up to two strings of 24 cells (48 cells total) and reports alarms via SNMP.

The BVM 48 G2 can report alarms to any SNMP manager and/or the DPS Telecom T/Mon LNX Remote Alarm Monitoring System. The device also comes standard with an integrated web interface that boasts several new time-saving tools. Menus load quickly and the alarm status updates automatically without requiring a page refresh.

Full Specifications

Battery Voltage Monitor (BVM) 48 G2 Back Panel
Back panel of the BVM 48 G2 - which offers a low-cost way of effectively monitoring voltage and temperature.

Full Specifications
Temperature Sensors 3 Integrated Analog Sensors (for external probe)
Temperature Thresholds 4
D-Wire Sensor Inputs: 4 chains with 12 sensors on each chain
Multi-purpose Analogs 3
Analog Input Range -90 to 90 VDC
Battery Cell Inputs 48
Analog Thresholds 4
Analog Accuracy: +/- 1% of actual value
Protocols SNMPv1, SNMPv2c, DCPx, TELNET, HTTP, Email
Dimensions 1.72" H x 17.026" W x 6.636" D
(4.4 cm x 43.25 cm x 16.85 cm)
Mounting 19" or 23" rack or wall mount
Power Input -48 VDC
Current Draw 50mA @ -48 VDC
Fuse 1/2 Amp GMT Fuse
Interfaces 1 RJ45 10BaseT Ethernet port
1 DB9 front-panel craft port
3 - 1/8 Stereo connector for external temperature probes
RS232 Serial Port
12 - 4-pin analog connectors for battery cell input
Visual Interface 10 Front Panel LEDs
4 Back Panel LED
Operating Temperature 32 - 140 degrees F (0 - 60 degrees C)
Operating Humidity 0%- 95% non-condensing
RoHS Yes (5/6)


Ordering Options

BVM 48 G2 with D-Wire
The BVM 48 is generally available in one standard configuration. You may choose any combination of D-Wire sensors. These specs apply:
Sensor Module: D-Wire Sensor.
Standard Cable Length (for 12 sensors): 8.33 feet between each battery.
Custom Cable Lengths: Choose exact cable length to connect back to the BVM 48 G2.


Applications

BVM 48 G2 setup
The BVM 48 G2 can have 2 strings and each of those strings can have 2 D-Wire sensors attached to it. Each of the D-Wire sensors can have 12 battery cell sensors, That makes the BVM 48 G2 capable of having 48 battery cells (over 4 chains with 12 sensors each) be daisy chained. By using this configuration 48 battery cells can be monitored by the BVM 48 G2.
D-Wire side view
Side view of the D-Wire sensor.
Maximum Allowable D-Wire Cable Length.
Sensor Nodes Max Length (ft).
1. 800.
2. 700.
3. 475.
4. 350.
5. 275.
6. 225.
7. 200.
8. 175.
9. 150.
10. 125.
11. 125.
12. 100.

On a new episode of DPS TV, Andrew introduces the Battery Voltage Monitor (BVM) 48 G2. Hear about and see some of its features. See how BVM 48 G2 can benefit you. Contact DPS to see if the BVM 48 G2 is the right solution for you.

Need a Quote?

Get it by: 6:45 PM Wednesday (today)

Now: 8:07 AM
Next Step:
Send Us Your Quote Request
8:12 AM Wednesday
We'll Start Work on Your Detailed Quote
6:45 PM Wednesday
Get Your Quote (Email PDF)

It's 8:07 AM on Wednesday at our Fresno, CA, USA headquarters. We can start on your quote right away.

Would you rather just call us? We're in the office right now. Call 1-800-693-0351.

Get a Quote