NetGuardian 832A G5 Web Browser Interface

NetGuardianG5WebInterface
The NetGuardian's Web Browser Interface lets you manage alarms and configure the unit through the Internet or your Intranet. You can quickly set up alarm point descriptions, view alarm status, issue controls, and configure paging information, and more.
NetGuardianDX
NetGuardian DX Expansion Unit

The NetGuardian Expansion provides an additional 48 discrete alarm points. Up to three NetGuardian Expansions can be daisy-chained off one NetGuardian, providing a total of 176 alarm points.


Discrete/AnalogSensors
Discrete and Analog Sensors

Fuel tanks, battery power, lighting systems, and water levels are just some of things you need to monitor to keep your network up and running. Track changing network conditions with these discrete & analog sensors.


8PortSerialSwitch
8 Port Serial Switch

The 8 Port Serial Switch allows you to connect up to eight data sources to one port on a collection device , such as the NetGuardian. Commands from an interrogating ASCII terminal control the switch to route data to the appropriate port. Each channel has a 16K buffer that allows data to be moved between ports at different data rates.


GLD
General LCD Display (GLD)

The GLD is a small wall-mounted remote terminal for the NetGuardian. The LCD display shows system status and alarm messages, and the built-in speaker gives an audible notice of alarms. Up to 12 GLDs can be daisy-chained off the NetGuardian. (NetGuardian with optional RS-485 port required.)


SiteMONIP
SiteMon IP Surveillance Camera

With this camera and RTU in one, you don't need to wonder what's going on at your sites. Connecting directly to the NetGuardian's optional LAN switch, the new SiteMON IP enables you to make security decisions remotely, allowing you to dispatch on-call staff, security, or even police. Available with or without an outdoor enclosure.


HingedWire-WrapBackPanel
Hinged Back Panels

The NetGuardian 864A supports wire-wrap terminations to the NetGuardian's alarm and controls via hinged back panel or 66-Block.


BuildingAccessSystem(BAS)
Building Access System (BAS)

The Building Access System is a comprehensive building management system that integrates into an existing alarm management platform. With the system in place, a log of all site access, including the time of day and location that access was granted, is maintained. The BAS is the perfect add-on for our KDA and NetGuardian products.


66block
66 block

A 66 block is a simple way to use wire-wrap connections with DPS RTUs. When telcos really want connections to stay in place, they use wire wrap. You'll simply punch down your alarm, analog, and/or control relay wiring to the 66 block, then connect the 66 block to the RTU using a standard amphenol cable (also available from DPS).

Need a Quote?

Get it by: 4:15 PM Monday (today)

Now: 1:06 AM
Next Step:
Send Us Your Quote Request
8:00 AM Monday
We'll Start Work on Your Detailed Quote
4:15 PM Monday
Get Your Quote (Email PDF)

It's 1:06 AM on Monday at our Fresno, CA, USA headquarters. It's early in the morning, but we'll start on your quote as soon as we get into the office.

Get a Quote
Sitemap