NetGuardian 832A G5: Ordering Options

NetGuardian 832A G5

The NetGuardian 832A monitors 32 discrete alarms and 8 analog alarms, pings 32 network elements, controls 8 relays, provides LAN reach through access to 8 serial ports, and reports via SNMP v2c or DCPx, e-mail, or pagers.

NetGuardian Models
NetGuardian 832A G5(32 discrete alarms, 32 ping alarms, 8 analog alarms, 8 control relays, 8 serial ports)
Selectable Configuration Options (Download complete list here):
16 serial ports (16S)
Wireless connection (GSM or CDMA)
Dual SFP-Fiber connection: Compatible with SFPs between 0.550 km and 180 km
Real time clock (Up to milliseconds)
On board ambient temperature sensor and integrated battery monitoring
Extended temperature range (-40 F to 158 F/-40 C to 70 C)
Power supply (+24, -24, -48, wide range -21 to -56 VDC)
Single or dual power feeds
Discrete alarm bias: Battery or TTL
Available in either a T1 or E1 option
Optional D-Wire input for D-Wire sensors
Integrated sensor power supply: +12VDC or +24VDC @ 1 Amp maximum (3/4 GMT fuse provided)
Individual serial port 1-8 configuration: RS232, RS485/422, 202, FSK, or other DPS' communication docking pads
Integrated 4 port 10baseT switch
Chassis color
Optional External Temperature Sensor Probe (Part Number: D-PR-991-10A-07)
NetGuardian Expansion Models
NetGuardian DX (expansion unit with 48 discrete points and 8 control relays)
NetGuardian DX G5 (832A model expansion unit with 32 discrete points, 8 analogs, and 8 control relays)
Selectable Configuration Options:
Control relays: none or 8
Integrated 8 port 10BaseT Switch
DNP3 Protocol reporting option

NetGuardian DX NetGuardian DX G4 Expansion Unit

The NetGuardian Expansion provides an additional 48 discrete alarm points and 8 control relays. Up to three NetGuardian Expansions can be daisy-chained off one NetGuardian, providing a total of 176 alarm points and 32 control relays.

NetGuardian DX G5 NetGuardian DX G5 (832A) Expansion Unit

The NetGuardian DX G5 (832A model) Expansion provides an additional 32 discrete alarm points, 8 analogs, and 8 controls. Up to three NetGuardian Expansions can be daisy-chained off one NetGuardian, providing a total of 176 alarm points, 32 analogs, and 32 controls.

NetGuardian SiteDialer NetGuardian SiteDialer

The DPS Site Dialer, featuring Alarm Shout™ technology, calls up to 8 contacts with your custom voice alerts when important alarm conditions occur.

Discrete and Analog Sensors Discrete and Analog Sensors

Fuel tanks, battery power, lighting systems, and water levels are just some of things you need to monitor to keep your network up and running. Track changing network conditions with these discrete & analog sensors.

8 Port Serial Switch 8 Port Serial Switch

The 8 Port Serial Switch allows you to connect up to eight data sources to one port on a collection device , such as the NetGuardian. Commands from an interrogating ASCII terminal control the switch to route data to the appropriate port. Each channel has a 16K buffer that allows data to be moved between ports at different data rates.

Building Status Unit Building Status Unit III

The Building Status Unit III (BSU III) is a local alarm notification device. This an excellent device to use when personnel at the site must be made aware of critical, major, and/or minor alarms. The BSU III provides audible and visual notifcation of alarms through its integrated 3 alarm notification LEDs and an audible speaker signal.

General LCD Display General LCD Display (GLD)

The GLD is a small wall-mounted remote terminal for the NetGuardian. The LCD display shows system status and alarm messages, and the built-in speaker gives an audible notice of alarms. Up to 12 GLDs can be daisy-chained off the NetGuardian. (NetGuardian with optional RS-485 port required.)

SiteMON IP SiteMon IP Surveillance Camera

With this camera and RTU in one, you don't need to wonder what's going on at your sites. Connecting directly to the NetGuardian's optional LAN switch, the new SiteMON IP enables you to make security decisions remotely, allowing you to dispatch on-call staff, security, or even police. Available with or without an outdoor enclosure.

Hinged Wire-Wrap Back Panel Hinged Back Panels / Alarm Termination

The hinged back panels provide wire-wrap or screw lug terminations to the NetGuardian's alarm and controls.

Building Access System (BAS) Building Access System (BAS)

The Building Access System is a comprehensive building management system that integrates into an existing alarm management platform. With the system in place, a log of all site access, including the time of day and location that access was granted, is maintained. The BAS is the perfect add-on for our KDA and NetGuardian products.

66 block 66 block

A 66 block is a simple way to use wire-wrap connections with DPS RTUs. When telcos really want connections to stay in place, they use wire wrap. You'll simply punch down your alarm, analog, and/or control relay wiring to the 66 block, then connect the 66 block to the RTU using a standard amphenol cable (also available from DPS).

3288 Test Fixture NetGuardian 3288 Test Fixture

The NetGuardian Test Fixture can verify every discrete alarm input, control relay, and voltage-based analog alarm input on a NetGuardian. It's great for testing derived controls, conducting lab tests, or diagnosing monitoring problems.

Power Supply External 110VAC Wall Transformer

The external 110VAC wall transformer converts commercial power to the DC power and termination required for your RTU. It is able to handle 110/220 VAC and depending on the build option, this wall transformer will need to be equipped with a WAGO, standard RIA, or locking RIA terminal end.

NetGuardian KIT Box NetGuardian Kit Box

Replacement kit box for the NetGuardian 832A. Includes cables, mounting ears, connectors, mounting screws, user manual, software CDs, and documentation CDs.

NetGuardian Monitoring Application NetGuardian Monitoring Application

Maybe your small group of NetGuardians is growing. Maybe you have a large fleet of RTUs and an SNMP manager, but you need regional visibility, too. For either of these scenarios, the NetGuardian Monitoring Application is the answer. This streamlined interface provides a comprehensive view of up to 8 NetGuardian RTUs.

Need a Quote?

Get it by: 4:15 PM Monday (tomorrow)

Now: 4:09 PM
Next Step:
Send Us Your Quote Request
8:00 AM Monday
We'll Start Work on Your Detailed Quote
4:15 PM Monday
Get Your Quote (Email PDF)

It's 4:09 PM on Sunday at our Fresno, CA, USA headquarters. It's late in the day, but we promise to start on your quote first thing in the morning.

Get a Quote
Sitemap