|NetGuardian 832A (32 discrete alarms, 32 ping alarms, 8 analog alarms, 8 control relays, 8 serial ports)|
|NetGuardian-C (16 discrete alarms, 16 ping alarms, 2 analog alarms, 2 control relays, 4 serial ports)|
|NetGuardian-CS (16 discrete alarms, 16 ping alarms, 2 control relays, 8 serial ports)|
|NetGuardian-CA (16 discrete alarms, 16 ping alarms, 2 control relays, 4 analogs alarms)|
|NetGuardian-CA (16 discrete alarms, 16 ping alarms, 2 control relays, 8 analogs alarms)|
|Selectable Configuration Options: Download Complete List Here|
|NetGuardian-C to NetGuardian upgrade package|
|Real time clock (Up to milliseconds)|
|Extended temperature range (-40 degree F to 158 degree F/-40 degree C to 70 degree C)|
|Power supply (+24, -24, -48, wide range -21 to -56 VDC)|
|Voltage monitoring of power feeds|
|Discrete alarm bias: Battery or TTL|
|Integrated sensor power supply: 12VDC or 24VDC|
|Individual serial port 1-8 configuration: RS232, RS485/422, 202, FSK, or other DPS' communication docking pads|
|Integrated 4 port 10baseT hub|
|NetGuardian Expansion Models|
|NetGuardian DX, (48 discrete point expansion unit)|
|Selectable Configuration Options|
|Single or dual power feeds|
|Control relays: none or 8|
|Integrated 8 port 10BaseT Hub|
|NetGuardian Test Box|
The NetGuardian Test Box allows technicians to verify every discrete alarm input, control relay, and voltage-based analog alarm input on a NetGuardian 832A.
| NetGuardian DX Expansion Unit |
The NetGuardian Expansion provides an additional 48 discrete alarm points. Up to three NetGuardian Expansions can be daisy-chained off one NetGuardian, providing a total of 176 alarm points.
The DPS Site Dialer, featuring Alarm ShoutTM technology, calls up to 8 contacts with your custom voice alerts when important alarm conditions occur.
| Discrete and Analog Sensors |
Fuel tanks, battery power, lighting systems, and water levels are just some of things you need to monitor to keep your network up and running. Track changing network conditions with these discrete & analog sensors.
| 8 Port Serial Switch |
The 8 Port Serial Switch allows you to connect up to eight data sources to one port on a collection device , such as the NetGuardian. Commands from an interrogating ASCII terminal control the switch to route data to the appropriate port. Each channel has a 16K buffer that allows data to be moved between ports at different data rates.
|General LCD Display (GLD) |
The GLD is a small wall-mounted remote terminal for the NetGuardian. The LCD display shows system status and alarm messages, and the built-in speaker gives an audible notice of alarms. Up to 12 GLDs can be daisy-chained off the NetGuardian. (NetGuardian with optional RS-485 port required.)
|SiteMon IP Surveillance Camera |
With this camera and RTU in one, you don't need to wonder what's going on at your sites. Connecting directly to the NetGuardian's optional LAN hub, the new SiteMON IP enables you to make security decisions remotely, allowing you to dispatch on-call staff, security, or even police. Available with or without an outdoor enclosure.
|Hinged Back Panels |
The hinged back panels provide wire-wrap or screw lug terminations to the NetGuardian's alarm and controls.
| Building Access System (BAS) |
The Building Access System is a comprehensive building management system that integrates into an existing alarm management platform. With the system in place, a log of all site access, including the time of day and location that access was granted, is maintained. The BAS is the perfect add-on for our KDA and NetGuardian products.
| 66 block |
A 66 block is a simple way to use wire-wrap connections with DPS RTUs. When telcos really want connections to stay in place, they use wire wrap. You'll simply punch down your alarm, analog, and/or control relay wiring to the 66 block, then connect the 66 block to the RTU using a standard amphenol cable (also available from DPS).
| External 110VAC Wall Transformer |
The external 110VAC wall transformer converts commercial power to the DC power and termination required for your RTU. It is able to handle 110/220 VAC and depending on the build option, this wall transformer will need to be equipped with a WAGO, standard RIA, or locking RIA terminal end.