RTU Solutions List: Small NetGuardians and NetDog

Monitor Battery Voltages and Temperatures with the NetGuardian 216
This application features a single NetGuardian 216 along with the Temperature Sensor with Probe. The NetGuardian 216 will use the Temperature Sensor with Probe to monitor your large scale batteries. It will be able to report alarms via SNMP over IP to your SNMP Manager.

Use WhatsUp Gold to Monitor Your Head End Sites with NetGuardians
This solution features the NetGuardian G4 along with the NetGuardian 480 DX Expansion Chassis as your monitoring solution for your large head end site and the NetGuardian 216 for monitoring at your smaller head sites.

Use Harris NetBoss to Monitor NetGuardians over SNMP
The NetGuardian 480 will be able to collect up to 80 TL1 type alarms while the NetGuardian G4 will be able to collect up to 32 discrete and 8 analogs. All the RTU's will be able to send those alarms via SNMP over IP to your Harris NetBoss Master Station.

Your UniCenter Master, Collecting Alarms from a NetGuardian 216
This solution features the NetGuardian 216. It will be able to report alarms and receive controls from your UniCenter SNMP Master.

Monitoring Your Tower Lights with the NetDog G2
Tower light monitoring is a critical function and will require a dependable means of alarm notification. Our solution takes the form of the NetDog 82IP.

Harris NetBoss Master and NetGuardian 216 RTU
This proposal features a -48VDC to 220VAC Wall Transformer, NetGuardian 216's, 66- Blocks and 3-feet 50-pin male Amphenol to Male Amphenol cables.

Send SNMP Traps to Your Castle Rock SNMP Manager With The Robust NetGuardian 216...
The NetGuardian included in this proposal feature dual -48VDC power inputs and they will be able to report SNMP over IP to your Castle Rock SNMP Manager.

Report Alarms to MegaSys SNMP Manager using NetGuardians over RS232 Serial
T/Mon SLIM will be equipped with SNMP Based alarm forwarding software for reporting to your MegaSys MOM over IP.

Megasys SNMP Manager monitoring a NetGuardian 216
Recognizing your need to monitor your smaller sites and have those critical alarms report to your MegaSys SNMP Manager, we have provided a solution for a NetGuardian 216.

APC InfrastruXure SNMP Manager monitoring the NetGuardian 216
This solution features a single NetGuardian 216 along with a 110VAC Wall Transformer. It is one of our smallest RTU's and will be able to monitor your Onan diesel generator and report the alarms via SNMP over LAN to your APC InfrastruXure SNMP Manager.

Your IPswitch Master Station can Monitor NetDog remotes
Both of these RTU's will be able to collect your environmental discretes (contact closures) and report those alarms via SNMP over LAN to your IPswitch Master Station.

Intermapper and Castle Rock SNMP Managers can Monitor NetGuardians
The NetGuardians in this solution can be monitored with your deployed SNMP Manager, including Intermapper or Castle Rock.

Use your Polyview SNMP Manager to Collect Alarms from NetGuardian RTUs
We have prepared this solution to replace the Badger Remotes in your current network. This solution will serve as a comparison sheet of the NetGuardian 216, and the NetGuardian 480, which will all report SNMP to Polyview.

Use Your Telenium Master to Poll NetGuardian RTUs
In this solution, the DPS Telecom RTU will have the ability to take your environmental alarms and send out SNMP alarms over LAN to your Telenium Master.

Monitor Your Server Room for Water and Heat Hazards using the NetDog
This solution features a single NetDog 82IP G2, four (4) Discrete (Hi/Low) Temperature Sensors, a single Analog Temp Sensor, a single Analog Temp Sensor designed specifically for the NetDog, and two Water Sensor and Controllers.

Monitor via Dial-up in a Protected NEMA Case and with Battery Backup using NetDog
The system includes a NEMA 4x corrosion resistant case, power supply, dual 12vdc, 12AH batteries and the NetDog 82IP. This robust configuration allows the monitoring to take place in dirty environments and maintain visibility during power failures (while it runs from battery).

Use The Hardened NetGuardian 216 To Monitor Cabinets and Report to Megasys...
All alarms will be sent via SNMP over LAN to your Telenium (Megasys) Master Station. The dual -48 VDC NetGuardian 216 offers...

Monitor Your Microwave Sites With NetGuardian Reporting SNMP Alamrs to Your Spectrum Manager...
All of the NetGuardians will be able to report SNMP over IP to your Spectrum SNMP Manager. For your Larger Sites, we recommened the NetGuardian 832 G4.

Monitor Your Generator and Building Alarms With the NetDog 82IP G2...
The NetDog 82IP’s 8 discrete alarm inputs can accept any contact closure type of event, such as door switches, fuse alarms, major and minor equipment alarms, high temperature alarms and tower light monitors.

Nagios Manager Collecting Alarms via SNMP over LAN from a NetDog G2
This application features three (3) NetDog 82IP's to monitor your alarm points, one for each site. The NetDog 82IP comes equipped with a built-in web browser, which will allow you to...

Use Your Existing Digital and Analog Microwave Networks to Collect Alarms
Analog to Digital microwave may seem like a daunting task. With replacing of your older equipment (including Larse) with contemporary technology, it will provide a far superior solution than using Legacy RTUs.

Provide Ethernet with the Router Integrated into This T1 RTU
For site outside of your existing LAN but within reach of a T1, the NetGuardian 216T may give you a means of monitoring your equipment.

Use This Hardened Remote To Report SNMP To Your MegaSys Telenium SNMP Manager...
The application features the NetGuardian 216, which can monitor temperature, humidity and door entry violations in your cabinets. This hardened remote can report alarms via SNMP over IP to your MegaSys Telenium Master Station.

Use MODBUS to Monitor Your Generator Output...
Both of these applications will allow the T/Mon NOC to receive the alarm messages, whether it is the MODBUS protocol or the DCPx protocol...

Gain Dense Discrete Alarm Point Coverage and Forward Alarms To Your SNMPC Manager....
This application provides a convenient way of alarm notification to your current SNMPc Manager.

Send SNMP Traps To Your Advent SNMP Manager...
The NetDog 82IP notifies personnel using a variety of methods with a complete status message, including sending an SNMP trap over IP to your Advent SNMP Manager and/or a text message to your pager.

Report Alarms to Your Zhone Technologies SNMP Manager...
Use this application to monitor six to eight dry contact alarms and report to Zhone Technologies's SNMP Manager.

Report Alarms via SNMP To Your Nagios Manager...
The NetDog 82IP G2 can report alarms via SNMP over LAN to your Nagios master station.

Use SNMP To Actively Monitor All Your Microwave Sites....
The T/Mon SLIM allows you to consolidate alarms from multiple remote sites into a single platform then share that alarm information with up to five users simultaneously using its built-in Web Browser interface or T/Windows remote access software. The T/Mon SLIM is a complete network alarm monitoring system in a 1RU package.

Give Us a Call!

To find out more about this and other DPS applications, give us a call at our toll-free number and talk to one of our network specialists. They'll help you put together a perfect fit solution for your network!