Transport Accessories

Transport Accessories support the movement of data in the alarm management network and provide electrical interface conversion between elements.

TL1 MUX-8
The TL1 MUX is a specialized data multiplexer for combining up to 8 data lines using BellcoreTM Transaction Language 1 (TL1) onto a single TL1 line. By observing the delineating semicolon at the end of each TL1 data packet, the processor in the TL1 MUX-8 is able to store and stack incoming data. The TL1 packets are then sent to the common port in the order received and transmitted to the interrogator one-at-a-time.

  • D-PC-181-10A-0V - Connectorized, no docking modules. Specify docking modules separately.
  • D-PC-182-10A-1V - Connectorized, RS232 common port, 1200 Baud 202 Modem on ports 1-8.
  • D-PC-182-10A-2V - Connectorized, RS232 common port, RS232 on ports 1-8.

12-Port Router RS232, Craft Port 232

Functional hubs up to 11 RS232 ports to a single RS232 output. Rack mountable 19/23", single rack unit high, available in both wire-wrap and DB9 connections.

  • D-PC-190-10A-0V - 12-Port Router RS232, Craft Port 232, wire-wrap connections
  • D-PC-190-10A-1V - 12-Port Router RS232, Craft Port 232, DB9 connections

12-Port Router (8-RS232, 4-Empty Pads), Wire Wrap

Connects two systems together in a primary/backup configurations and routes the active system (i.e.: 1 four port intelligent ctr). Requires 4 docking modules. Includes RS485 Ctrl & RS232 Craft port. Rack Mountable 19/23".

Protection Switch (8-RS232, 4-Empty pads), RJ11 Connections

(T/MonXM Protection Switch) Connects two T/MonXM's together in a primary/backup configuration and routes the active system to the peripherals. Routes 4 ports per system (i.e. 1 four port intelligent ctrl). Requires 4 docking modules. Includes RS485 Ctrl & RS232 Craft Port and cable kit. Rack Mountable 19/23".

  • D-PC-190-10A-4V - T/MonXM Protection Switch (8-RS232, 4-Empty pads), RJ11 Connections

Protection Switch (8-RS232, 4-Empty pads), DB9 Connections

(IAM Protection Switch) Connects two IAM's together in a primary/backup configuration and routes the active system to the peripherals. Routes 4 ports per system (i.e. 1 four port intelligent ctrl.). Requires 4 docking modules. Includes RS485 Ctrl & RS232 Craft Port and cable kit. Rack Mountable 19/23".

  • D-PC-190-10A-5V - IAM Protection Switch (8-RS232, 4-Empty pads), DB9 Connections

Need a Quote?

Get it by: 4:15 PM Tuesday (today)

Now: 3:12 AM
Next Step:
Send Us Your Quote Request
8:00 AM Tuesday
We'll Start Work on Your Detailed Quote
4:15 PM Tuesday
Get Your Quote (Email PDF)

It's 3:12 AM on Tuesday at our Fresno, CA, USA headquarters. It's early in the morning, but we'll start on your quote as soon as we get into the office.

Get a Quote
Sitemap