T/MonXM 4.7 User Manual

7-4

Section Seven - Managing System Users

Table 7.A - Fields in the the System Users screen (continued)

* These fields are range variables. Numbers entered must be in some valid range. Example 1-3, 7.

Field

Description

Diagnostics

Allows access to the Main Menu and Diagnostics Menu when offline. Y (Yes)

or N (No).

Database Xfer

Allows access to Transfer the Database to another T/MonXM when multiple

masters are in the system. Y (Yes) or N (No). (Also allows user to read/write

via FTP sessions)

Run Reports

Allows access to the Report Generator. Y (Yes) or N (No).

File Maintenance Allows access to the File Maintenance menu. Y (Yes) or N (No).

Edit Parameters Allows access to the Parameters menu. Y (Yes) or N (No).

System Operator Allows access to the System User database. Y (Yes) or N (No).

Start Chat Mode Allows access to Chat Mode and lets a user chat with others or the host com-

puter. Y (Yes) or N (No).

Device On/Off Line Allows access to take devices on and off line. Y (Yes) or N (No).

Exit Monitor Mode Lets the user exit Monitor Mode. Y (Yes) or N (No).

Tag/Silence Alarms Lets the user tag or silence alarms in Monitor Mode. "Silence" has a time limit

that is defined in Monitor mode. Y (Yes or N (No).

Bldg Manual Logout Determines whether the operator is allowed to manually log persons out of a

Building Access site. Y (Yes) or N (No).

Configure Remotes Allows downloading configurations to remotes. Y (Yes) or N (No).

Craft Mode

Allows access to Craft Interface Mode which lets you talk to an ASCII device

connected to T/MonXM. Y (Yes), N (No) or L (Log - captures all data on the craft

port to a file on the hard drive. The files will be named cl-XXX.rep, where

XXX=the user intials)

Init Stats

Allows the user to initialize port statistics. Y (Yes) or N (No).

Printer Logging

Allows the user to toggle printer logging. Y (Yes), N (No) Auto On permits the

system to automatically begin logging after users log onto the system. Refer to

the Printer Logging Section for more information.

Trouble Log

Valid settings are: None: Trouble Logs cannot be viewed or edited. View

Only: Trouble Logs may be viewed but not edited. Modify: Trouble logs can

be viewed or edited.

Auto log off

The number of minutes of no keyboard activity before the user will be auto-

matically logged off. Valid values are 5-200. Enter 0 to disable. This protects

your log-on code.

Id Number

Number used to log in at remote site. Up to 8 digits. Valid settings are:

DTMF; 001-899; BAU: 001 - 89999999; Blank: None

Note:

T/Mon 4.2 and later version users can define Building Access System

user profiles in the Main Menu > Files > Building Access > BAS Profiles.

Pager Edit/Lock Setup pager schedules and set pager locks. Y (Yes) or N (No).

ASCII Text Log

Allows viewing or acknowledging ASCII text alarms. Valid settings are:

None:

ASCII text cannot be viewed or acknowledged.

View:

ASCII text may be viewed but not acknowledged.

Ack:

ASCII text can be viewed or acknowledged individually.

Ack All:

All ASCII text messages can be viewed or acknowledged.

Site Stats

Yes or No. Allows or prevents access to Site Statistics screens.

Dialup Stats

Yes or No. Allows or prevents access to Dial Up Site Monitor Screens.