T/MonXM 4.7 User Manual

5-10

Section Five - Configuring Remote Access

Selecting

Special Keys

on Remotes

Selecting Function Keys

Hold down the key and press F then the number of the function key

desired. For example: To select Function 4 (F4), Press CTRL, F,

and number 4.

Selecting Alternate Function Keys

Hold down the key and press A then the number of the function key

desired. For example: To select Alt Function 6 (Alt-F6), Press

CTRL, A, and number 6.

Selecting Control Function Keys

Hold down the key and press C then the number of the function key

desired.

Note:

If you are using a

T/Remote or T/Windows,

normal function keys may

be used as though they

were the main T/MonXM

system’s function keys.

Table 5.E - Functions that will not work on remotes

Selecting Shift Function Keys

Hold down the key and press S then the number of the function key

desired.

Function keys are available as well as the Special Keys operation.

For more information refer to Monitor Mode, Section 16, of this

manual.

Table 5.E lists operations that do not work on remotes.

Selecting

Function Keys

on Remotes

Function Key

Description

Alt F8

Protocol Analyzer.

CTRL F4

Toggle relay card Sound Cut Off.