T/MonXM 4.7 User Manual

UM-TMN-470

Section Five - Configuring Remote Access

5-9

D-SK-159-10A-00

Changing

Terminal Drivers

When a remote terminal logs on to the T/MonXM host system by

modem, a terminal driver selection menu will appear to allow the

remote user to select a terminal driver. The remote terminal user

may press CTRL “T” at any time after the log on password is

entered to change terminal drivers. The Terminal Driver selection

menu is shown below:

Terminal Driver Query

Currently Affixed Driver == T/Remote Color Driver

1. Accept Current Driver

2. Affix T/Remote Color Driver

3. Affix WYSE 50 Driver

4. Affix ADDSVP (DPS TEST SET) Driver

5. Affix VT-100 Driver

6. Affix ENHANCED VT-100 Driver

To change terminal drivers follow these steps:

A. Press CTRL T

B. Enter the number of the terminal driver that you want

from the Terminal Driver Selection menu.

C. Enter “1” for Accept Current Driver

D. Answer “Y” for the query LOGON WITH DRIVER

== (DRIVER NAME) READY (Y/N)

Almost all commands that are available on the host T/MonXM sys-

tem are available on the remote terminals. The procedure for select-

ing the command key is the only difference. The following key list

is only for use with the remote terminals that are connected to the

host T/MonXM system.

Once the remote user has chosen the proper terminal driver and has

entered the correct security Initials and Password, the following

optional features will be available:

Help Screen

?

Help Screen commands. This will bring up a window

listing the various commands available at the current

screen.

Refreshing the Terminal Display

CTRL-Z

Clears and refreshes the remote terminal screen.

This should be performed when connecting or

turning on a remote terminal after the host sys-

tem is already operating or if a bad modem

connection causes garbage (noise) to be dis-

played on the screen.

When selecting special keys such as Function, Alternate Function,

and Control Function Keys, you must follow the following key-

stroke rules shown on the following page.

Note:

Changing terminal

drivers is available only

when connected by

modem using a dumb

terminal.

Remote Terminal

Control Keys