T/MonXM 4.7 User Manual

5-4

Section Five - Configuring Remote Access

Remote Access

Server

Remote Access can be configured two ways:

1. Standard Remote Access, through a serial port connection (Ports

1-20) or a virtual LAN connection on ports 30-47.

2. Remote Access Server, through a virtual LAN port (Ports 30 and

above).

Standard Remote Access requires a separate remote access port for

every simultaneous viewing session. But with Remote Access Server,

multiple users can share a pool of available TCP ports. As users log

on they are automatically assigned a TCP connection from the pool

by T/MonXM.

This section explains how to set up Remote Access Server via LAN,

including setting up Remote Access pools.

Your first step is to create a Remote Access Server on a LAN port

a. Choose Master > Parameters > Remote Ports.

b. Choose F)ind, and enter a port number above 47.

c. Select Remote Access Server for the port usage, and enter an

optional description in the Description field.

d. A yellow prompt at the top of the screen will read “<No Data

Connection.>.”

Step One

Fig. 5.3 - Remote Access Audible Options screen