T/MonXM 4.7 User Manual
UM-TMN-470
Section Five - Configuring Remote Access
5-3
D-SK-159-10A-00
The Remote Access Audible Options screen is accessed by pressing
F1 in the Remote Access Remote Parameters screen.
The audible options provide support for terminals that will make an
audible signal when an alarm event occurs. Audible signals can be set
for all alarm severity levels and for change-of-state alarms.
The option fields in the Remote Access Audible Options screen are:
Level A Masked
No audible alarm will sound for Critical alarms.
Level B Masked
No audible alarm will sound for Major alarms.
Level C Masked
No audible alarm will sound for Minor alarms.
Level D Masked
No audible alarm will sound for Status alarms.
Pulse on New COS
An audible alarm will sound whenever a new change-of-state alarm
occurs
By default, all fields in the Remote Access Audible Options screen
are set to “No.”
Fig. 5.2 - Remote Access Audible Options screen
Remote Access
Audible Options
Table 5.D - Key commands available in Remote Parameters screen
Function Key
Description
F1
Opens Remote Access Audible Options screen for setting audible alert options.
F5
Toggle Suspend. Allows you to define but temporarily halt or suspend this function.
F10/Esc Leaves the Remote Parameters Screen.
Note:
Auto Login Inits enters only the initials; the user must still enter
his or her password.
Refer to Table 5.D for key commands available in the Remote
Parameters screen.
