T/MonXM 4.7 User Manual

UM-TMN-470

Section Two - Software Installation

2-13

Fig. 2.15 - Press E to edit your T/Link configurations

Table 2.B - Fields in the T/Link Configuration screen

Selection

Description

First Port (Typically T/Access port on computer)

Com

Enter the T/Access Com port number (1-4, “-“ for none)

Baud

Select the baud rate for the T/Access Com port (300, 1200, 2400, 9600).

Usually baud rate is 9600.

Note:

Press the Tab key to select rate from menu. Make sure Caps Lock is off.

Modem

Select N (No) for T/Access port (select No for no modem on this port)

Second Port (Typically Modem port on IAM or T/Mon) *

Com

Enter the Modem Com port number (1-4, “-“ for none)

Baud

Select the baud rate for the T/Access Com port (300, 1200, 2400, 9600).

Usually baud rate is 9600.

Note:

Press the Tab key to select rate from menu. Make sure Caps Lock is off.

Modem

Select Y (Yes) for Modem port

Modem Password Enter a new password for increased security

Modem Setup Enter your user defined modem init. string

* Typically modem for remote access.