T/MonXM 4.7 User Manual

2-12

Section Two - Software Installation

Quit

To exit the T/Install utility choose Quit from the Main Menu. You

will return to the W/Shell Main Menu depending upon where you

started.

The T/Link utility controls remote access of the T/Mon or IAM via

T/Access. Normally you do not have to change the default T/Link

settings—with one important exception. You should change the

default factory password for increased security.

Edit T/Link Configuration Settings

Use the following instructions to edit your T/Link configuration set-

tings:

1. To edit your T/Link configuration settings, use your arrow keys

to highlight TLINK and press Enter. The TLINK menu will

appear (see Figure 2.14).

2. Highlight and choose “Configure T/Link. The T/Link

Configuration screen will appear. See Figure. 2.15.

3. Press E (Edit) to edit your configuration settings.

4. Press F8 to save your changes.

T/Link

Note:

Change the factory

default password in T/Link

for increased security.

Fig. 2.14 - T/Link Utilities menu