T/MonXM 4.7 User Manual

2-10

Section Two - Software Installation

Remove

Software

Start the T/Install utility using the original DPS software disk(s).

Choose the Remove option.

A removal window will appear at the

bottom of the screen. Note that the program will remove program

files from the specified drive and path; however, files other than the

program files (i.e. data files created by software) will remain.

Before a removal starts, the following prompts must be answered.

Remove software from drive (A-H).

The source drive cannot be

the removal drive.

Drive from which the software will be removed.

Enter the drive

letter followed by Enter to select. Valid drives are A - H.

Path of program files.

Path of installed software to be removed.

Drive ID must be omitted since it has been already entered from the

previous prompt. If software is in the root directory, type “\” or “ ”

(space) followed by Enter.

Name of Uninstaller.

Enter your name here and press Enter.

Comment.

Enter an identifying comment in reference to this

removal.

Confirm to remove (Y/N).

Type “Y” and press Enter to start

removal or “N” to go back to the beginning of removal procedure.

You have now removed a

working copy

from a disk and restored it

back to the original DPS software disk.

Note:

This option is

typically not used.

There is no need to

remove old versions

before installing newer

versions.

Fig. 2.12 - Removal screen