9852

Get a Live Demo

You need to see DPS gear in action. Get a live demo with our engineers.

White Paper Series

Check out our White Paper Series!

A complete library of helpful advice and survival guides for every aspect of system monitoring and control.

DPS is here to help.

1-800-693-0351

Have a specific question? Ask our team of expert engineers and get a specific answer!

Learn the Easy Way

Sign up for the next DPS Factory Training!

DPS Factory Training

Whether you're new to our equipment or you've used it for years, DPS factory training is the best way to get more from your monitoring.

Reserve Your Seat Today

Report Alarms as SNMP Traps

Related Prods Show Me Products That Do This ...
Report Alarms as SNMP Traps

Monitor All Your Alarms, Including Discretes and Environmentals, With Your SNMP Manager

Most of your network runs SNMP, so you want to monitor all your alarms with your SNMP manager. That makes a lot of sense, because there are many advantages to consolidating your monitoring on a single platform.

But not everything on your network is native SNMP. You also need to monitor discrete alarms and analog alarms to really see what's going on at your remote sites. How can you monitor these alarms without using a second management system?

The answer is a remote telemetry unit that collects discrete and analog alarms and sends them as SNMP traps to your SNMP manager. This advanced remote will fully capture discrete and analog alarm data, including severity, location, date/time, and live analog values, and send detailed information in the trap packet.

This will give you full visibility of equipment failures and environmental conditions at your remote site that can result in network downtime. And you'll get this visibility without the expense of maintaining a specialized network monitoring system to monitor only these alarms.

The Cost Savings of a Multiprotocol Master

When you are integrating a wide variety of remote telemetry devices, including SNMP and legacy protocols, the ideal solution is to integrate all your monitoring into a single multiprotocol monitoring platform, for several reasons.

Using a single interface for all your monitoring applications will:

  • Create substantial savings in initial expenditure, operational, and maintenance costs
  • Save your investment in legacy protocol devices
  • Give you a smooth transition to advanced telemetry capabilities
  • Allow you to spread network equipment upgrade costs over several budget cycles, since both old and new equipment types are supported by the multiprotocol master.

Products that do this: T/Mon LNX

Free, No-Risk Engineering Development to Integrate Legacy Devices and Protocols

While DPS Telecom supports over 15 protocols, you may need to use a protocol that we don't currently support. That's no problem - we can add support for the protocol you need, at no expense, risk, or obligation to you.

Related Prods Show Me Products That Do This ...

Top top