Announcing the New NetGuardian 4.0: New Firmware Now Includes SNMP v2c Support, Alarm Severity Levels and Other New Extras

Your NetGuardian is about to be transformed by one of the most significant firmware updates ever. The new NetGuardian 4.0 firmware includes next-generation features like support for SNMP v2c and the INFORM command; customizable alarm severity levels; global support for dual SNMP managers; plus many under-the-hood improvements.

The NetGuardian 4.0 release adds more flexibility, intelligence and power to your NetGuardian RTUs, and sets the foundation for all future NetGuardian hardware and software development.

SNMP Format Menu: Choose from three SNMP formats, for backwards compatibility, lightweight network traffic or robust message delivery.

SNMP v2c Support and Robust Message Delivery

The most significant advance in NetGuardian 4.0 is support for SNMP v2c and the SNMP INFORM command, which permits robust delivery of alarm notifications to your SNMP manager.

TRAP notifications, supported in SNMP v1 and later, are considered non-robust because the SNMP manager doesn't send an acknowledgement in response to the TRAP. The device sending the TRAP sends it only once; the sending device has no confirmation that the TRAP has been received; and so there's no guarantee that the alarm information has been successfully sent to the SNMP manager.

INFORM notifications, supported in SNMP v2c, are designed for confirmed delivery. When an SNMP manager receives an INFORM, it sends a confirmation response back to the SNMP agent device that sent the INFORM. If the SNMP agent device doesn't receive a response to its INFORM, it resends the INFORM until the SNMP manager sends the confirmation response.

INFORM notifications are not the best choice for everybody; you're choosing a trade-off of reliable delivery at the cost of heavier network traffic. A TRAP is only sent once, which makes very little demand on network resources. The INFORM reqires a response packet to be sent and messages may be sent several times, which increases reliability but makes more demands on the network.

NetGuardian 4.0 lets you choose between three different SNMP formats: SNMP v1-format TRAP, SNMP v2c-format TRAP and SNMP v2c-format INFORM. You can select whether you prefer TRAP or INFORM format, or you can select a SNMP v1-format TRAP for compatibility with legacy SNMP managers that may not support SNMP v2c. NetGuardian 4.0 is backwards compatible with earlier NetGuardian firmware, so you may operate NetGuardians with 4.0 firmware and NetGuardians with earlier firmware in the same network.

Two Global SNMP Managers: Configure two different trap addresses and your alarms are automatically sent to primary and secondary SNMP managers.

Global Support for Dual SNMP Managers - More Flexible Alarm Reporting

NetGuardian 4.0 supports sending all SNMP TRAP and INFORM notifications to two global SNMP managers. This makes it easier to configure a secondary SNMP manager and frees up your NetGuardian configuration for more notification devices and more flexible alarm reporting.

To use this feature, simply specify two Trap Addresses in the NetGuardian's SNMP configuration. All alarms that are configured to send a TRAP or INFORM will automatically be forwarded to both SNMP managers. It's easy and automatic.

This frees up more of your NetGuardian configuration for more notification devices. You can configure up to eight additional notification devices (more SNMP managers, a T/Mon NOC, text messaging, pager or email). Plus you can configure up to four separate notifications for each alarm.

For example, you can easily send an alarm to your primary SNMP manager at the NOC; to a secondary backup SNMP manager at another location; to the pager of the on-call technician; and the email in-box of the technician's supervisor.

Alarm Point Groups: Sort NetGuardian alarm points by severity, equipment type or any other criteria you choose.

Alarm Point Grouping Provide Severity Levels, Custom Virtual Alarms and More

Another big new feature in NetGuardian 4.0 is customized Alarm Point Grouping. Each NetGuardian alarm point can be assigned to one of eight groups, which are identified with a user-defined label. This adds an amazing amount of flexibility to how you view and use your alarm data at the RTU level. Some of the ways you can use Alarm Point Grouping include:

• Alarm Severity Levels: Most users will want to use Alarm Point Grouping to indicate alarm severity levels, like Critical, Major, Minor and Status. NetGuardian 4.0 indicates alarms' assigned severity level in a variable binding within the SNMP TRAP or INFORM message - so you can easily sort your alarms by severity within your SNMP manager.

• Two Sets of Alarm Severity Levels: Since you have eight alarm groups to work with, you can easily create two different sets of severity levels. For example, you could separate power alarms (rated from Critical to Status) from environmental alarms (also rated from Critical to Status)

• Custom Virtual Alarms: With NetGuardian 4.0's Alarm Point Grouping, you can create custom virtual alarms based on easy formulas like "all Security alarms" or "Critical power alarms." These virtual alarms are easily mapped to any NetGuardian or NetGuardianDX control relay. For example, the NetGuardian may automatically turn on a generator when any critical power alarm occurs.

• Greater Flexibility in Creating Custom Derived Controls: In earlier NetGuardian firmware, users had to specify each alarm point used in a Derived Control formula. NetGuardian 4.0 lets you create Derived Control formulas based on Alarm Point Groups.

• Granular Pager and Email Notification: You can also use Alarm Point Grouping to selectively assign alarm points to specific pager and email notification recipients. If you like, you can be paged only for Critical or Major alarms - or you can send power alarms to a repair technician and intrusion alarms to a security guard.

Event Log: The NetGuardian Event Log can be selectively filtered by Alarm Point Group, or reset to clear old events.

Filter or Reset the NetGuardian Event Log

The NetGuardian Event Log has been enhanced to support new NetGuardian 4.0 features:

• You can filter Event Log entries by Alarm Point Group, to see only the alarms you want.

• You can reset the Event Log, to clear old alarms from the display.

• You can reset the Event Log by Alarm Point Group; for example, clear power alarms while retaining intruder alarms.

Alarm Sync Makes Turnup and Testing Easy

NetGuardian 4.0 also provides a new command to resynchronize all alarms. This command clears all alarms, so that a new notification is sent for all standing alarms. You can easily test alarm connections during turnup without rebooting the NetGuardian unit.

Register Now for Your NetGuardian 4.0 Upgrade

The NetGuardian 4.0 firmware update will soon be ready for general release. Don't miss this important upgrade - register now and receive an email alert when the NetGuardian 4.0 firmware is available for free download.

Give Us a Call!

To find out more about this and other DPS applications, give us a call at our toll-free number and talk to one of our network specialists. They'll help you put together a perfect fit solution for your network!