Report Alarms In TL1

Related Prods Show Me Products That Do This ...
Report Alarms in TL1

Monitor Discrete and Environmental Alarms with Your TL1 Master

If TL1 is your preferred protocol for monitoring your network, you may find that you still need other protocols to get complete visibility of your remote sites. Network outages can occur because of failures of non-IP equipment or environmental factors. But your TL1 master is deeply embedded in your network, and you don't want to install a specialized network monitoring system to manage site alarms.

The answer is a remote that collects alarms from discrete contact closures and analog sensors and sends the alarm data in TL1 to your master. This solution is practical, cost-effective, and provides the many advantages of an integrated, multiprotocol network monitoring solution.

The Cost Savings of a Multiprotocol Master

When you are integrating a wide variety of remote telemetry devices, including multiple protocols, the ideal solution is to integrate all your monitoring into a single multiprotocol monitoring platform, for several reasons.

Using a single interface for all your monitoring applications will:

  • Create substantial savings in initial expenditure, operational, and maintenance costs
  • Save your investment in legacy protocol devices
  • Give you a smooth transition to advanced telemetry capabilities
  • Allow you to spread network equipment upgrade costs over several budget cycles, since both old and new equipment types are supported by the multiprotocol master.

Free, No-Risk Engineering Development to Integrate Legacy Devices and Protocols

While DPS Telecom supports over 15 protocols, you may need to use a protocol that we don't currently support. That's no problem - we can add support for the protocol you need, at no expense, risk, or obligation to you.

If you need a custom-engineered solution, your choice of vendor is critical. Many equipment vendors charge up-front non-recurring engineering fees (NREs) for custom engineering and give no guarantee that the resulting work will provide effective monitoring for your network. If the final product doesn't give you the visibility you need, the money you spent on custom engineering is just money down the drain, and that doesn't look good on anybody's record.

You shouldn't have to pay extra for the protocol support that you need. You shouldn't have to take the risk of paying for a solution that may not work. In today's rapidly-changing technology environment, innovation is a standard product - a commodity - and you shouldn't have to pay an extra fee for it with no guarantee of a solution.

At DPS Telecom, custom design is a standard service. Our business has been built on continuous innovation, and we embrace opportunities to design new network monitoring solutions. We have successfully adapted many types of legacy-protocol remotes to work with our advanced telemetry masters, and we can do the same for you. Typically, all that is required is a minimum order.

Our custom solutions are backed by a 30-day, no-risk guarantee. Test the proposed solution under real-world conditions for 30 days, and if, at any time during that period, you decide for any reason that our solution will not meet your monitoring needs, you can cancel your order with no further obligation.

Related Prods Show Me Products That Do This ...

Top top


Sitemap